Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Frequency Analysis for structure with Film Damping

Posted 29.03.2011, 03:06 GMT-4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 3.5a, Version 4.2, Version 4.2a 4 Replies

Siddhartha Patra
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,
I want to do frequency response analysis for a structure with film damping. Is there any existing model in comsol for that or has anybody done somethin on this? Please let me know if you have any information.
Thanks,
Siddhartha
4 Replies Last Post 02.11.2011, 11:32 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 29.03.2011, 15:20 GMT-4
Hi

have you checked the model builder in the mems section, there is a film damping example, cannot remember if it was frequency sweep (believe so) or only eigenfrequency analysis

--
Good luck
Ivar
Hi have you checked the model builder in the mems section, there is a film damping example, cannot remember if it was frequency sweep (believe so) or only eigenfrequency analysis -- Good luck Ivar
Siddhartha Patra
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 01.04.2011, 01:32 GMT-4
Hi Ivar,
I have found one example on squeeze film, but it is on a transient problem.
Siddhartha
Hi Ivar, I have found one example on squeeze film, but it is on a transient problem. Siddhartha
Siddhartha Patra
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 03.04.2011, 06:02 GMT-4
Hi,
I want to find out frequency response of a squeeze film with structure. Can anybody help me with existing module or instructions?
Thanks,
Siddhartha
Hi, I want to find out frequency response of a squeeze film with structure. Can anybody help me with existing module or instructions? Thanks, Siddhartha
dnh37
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 02.11.2011, 11:32 GMT-4
Hi Siddhartha,

Did you find a solution?

I also want to do squeeze-film damping frequency response. Mostly I just want to model the quality factor.

The other problem is, I have an arbitrary geometry. The model in the Comsol Model Library uses the math to assume the air is squeezed out only at the edges -- if you add periodic holes then you have to use different math to assume that the air is squeezed out the holes. (So you can see what I mean, go here: www.comsol.com/multiphysics/slidingfilms/, download the pdf for the model, and look on Page 2 where it references Ref 3).
However Ref 3 only includes periodic holes. I have a funny arbitrary geometry...

Any ideas?

Thanks
Hi Siddhartha, Did you find a solution? I also want to do squeeze-film damping frequency response. Mostly I just want to model the quality factor. The other problem is, I have an arbitrary geometry. The model in the Comsol Model Library uses the math to assume the air is squeezed out only at the edges -- if you add periodic holes then you have to use different math to assume that the air is squeezed out the holes. (So you can see what I mean, go here: http://www.comsol.com/multiphysics/slidingfilms/, download the pdf for the model, and look on Page 2 where it references Ref 3). However Ref 3 only includes periodic holes. I have a funny arbitrary geometry... Any ideas? Thanks

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content