Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Eigen frequency
Posted 06.05.2011, 06:12 GMT-4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
respected sir
i want to know about following
1) what do mean by eigen frequency ?
2) why eigen frequencies are imaginary?
3) and how to calculate quality factor?
waiting for reply sir
1 Reply Last Post 06.05.2011, 08:04 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
check the doc, first of all: in a few words, an eigenfrequency is the frequency of the fundamental modes of vibrations of a structure (or another non solid model) obeying a vibration compatible PDE law (thermal or diffusion cannot generate modes in the same sense)
When an eigenfrequency is complex, it means that you have damping and dephasing of the mode shape/response. the you need to plot the real() and arg() part or abs() and arg() (arg() = atan2(imag()/real()) part)
--
Good luck
Ivar
check the doc, first of all: in a few words, an eigenfrequency is the frequency of the fundamental modes of vibrations of a structure (or another non solid model) obeying a vibration compatible PDE law (thermal or diffusion cannot generate modes in the same sense)
When an eigenfrequency is complex, it means that you have damping and dephasing of the mode shape/response. the you need to plot the real() and arg() part or abs() and arg() (arg() = atan2(imag()/real()) part)
--
Good luck
Ivar