Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulating Underground salt cavern as storage for hydrogen
Posted 28.10.2019, 10:41 GMT-4 Chemical, Computational Fluid Dynamics (CFD) Version 5.2a 0 Replies
Please login with a confirmed email address before reporting spam
Hello,
i'm trying to simulate the change of an underground salt cavern storage from methane to hydrogen. At the beginning of the simulation there is methane in the storage at 30 bar. From the top of the cavern hydrogen is injected until the maximum operating pressure (should be around 160 bar). After the maximum operating pressure is reached, the injection is stopped.
I'm facing some problems: * the simulation is very time consuming (would take years to run the whole simulation) * time stepps taken by the solver are very small (between 0.1 and 1.5 s) * sometimes the mass source of w2 is above 1, which is non sense
Has someone an idea to optimize the model? My Model is attached.
Kind Regards
Benjamin
Attachments:
Hello Benjamin Keßler
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.