Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
question in EMI simulation
Posted 31.01.2012, 22:27 GMT-5 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I am trying to use the Electromechanics simulation in 4.2a, but found that the check box for "Include Geometric Nonlinearity" is always checked by default and cannot be unchecked (grey check box), just wondering is this normal?
Thanks!
I am trying to use the Electromechanics simulation in 4.2a, but found that the check box for "Include Geometric Nonlinearity" is always checked by default and cannot be unchecked (grey check box), just wondering is this normal?
Thanks!
1 Reply Last Post 01.02.2012, 00:52 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Yes it is "normal" as you have large deformations to take care of in most EMI applications, Even if you try to make your own combination ALE+Solid+ES you will have it checked because of the ALE
This means that your model is "heavier" and mostly non-linear, hence takes some more time to solve, but you will not violate the hypotheses if linear small strain inherent with the unchecked case
--
Good luck
Ivar
Yes it is "normal" as you have large deformations to take care of in most EMI applications, Even if you try to make your own combination ALE+Solid+ES you will have it checked because of the ALE
This means that your model is "heavier" and mostly non-linear, hence takes some more time to solve, but you will not violate the hypotheses if linear small strain inherent with the unchecked case
--
Good luck
Ivar