Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to add materials to imported layers
Posted 19.06.2012, 11:28 GMT-4 Heat Transfer & Phase Change, Materials Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
I have a 2D model for a circuit board, and I have imported 5 different layers in geometry. Now I need to add materials on these 5 layers(each one have a kind of material). How to do that?
Now COMSOL separates geometry into little peaces, but I want them be some composed domains for one layers.
Now COMSOL separates geometry into little peaces, but I want them be some composed domains for one layers.
1 Reply Last Post 19.06.2012, 16:16 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
if you have thin metal conductors, I would propose that you consider surface thin conducting layers,then you need only to cut the surface with a workplane without extrusions
--
Good luck
Ivar
if you have thin metal conductors, I would propose that you consider surface thin conducting layers,then you need only to cut the surface with a workplane without extrusions
--
Good luck
Ivar