Analyzing a Supersonic Ejector with CFD Simulation

Caty Fairclough April 16, 2018

Ejectors have many applications, such as removing debris in outer space and providing refrigeration at your local supermarket. To improve ejectors for these and other uses, engineers aim to find optimal designs and operating conditions as well as accurately describe the flow within these devices. Simulation can help achieve these goals.

Weiterlesen

Kategorien

Ed Fontes March 26, 2018

The algebraic multigrid (AMG) solver provides robust solutions for large CFD simulations. Available as of version 5.3a of the COMSOL Multiphysics® software, the AMG method only requires one mesh, in contrast to the geometric multigrid (GMG) solver, which requires at least one extra coarser mesh. This eliminates the hassle associated with creating coarse meshes for complex geometries with small details that are difficult to mesh unless a fine mesh is used.

Weiterlesen

Kategorien

Nicolas Huc March 15, 2018

Nonisothermal flow combines CFD and heat transfer analysis. In cases where the temperature of the fluid at an inlet is a known quantity, a Temperature boundary condition can be used. However, there are some important situations where this is not the case, and an Inflow boundary condition can improve the model accuracy and reduce the computational cost of the simulation. Here, we review how this more sophisticated thermal boundary condition can be set at a flow inlet.

Weiterlesen

Bridget Paulus February 27, 2018

Due to their small size and efficiency, compact heat exchangers are used in many application areas, including HVAC, nuclear power, and electronics. To help increase heat transfer rates and reduce pressure drops in these devices, a large number of studies have been performed, exploring concepts such as incorporating a deforming wall into the design. Using the COMSOL Multiphysics® software, you can evaluate a dynamic wall heat exchanger design.

Weiterlesen

Nathan Martin February 8, 2018

In a 2013 report, the Intergovernmental Panel on Climate Change stated that Earth’s cryosphere is “a natural integrator of climate variability and provides some of the most visible signatures of climate change.” (Ref. 1) The cryosphere is the part of the climate system that contains frozen water and makes up 80% of our fresh water. Using the COMSOL Multiphysics® software, we can simulate classical ice flow to analyze cryosphere dynamics and assess climate change effects such as rising sea levels.

Weiterlesen

Kategorien

Bridget Paulus February 7, 2018

Natural convection is a type of heat transport found in engineering applications of all sizes. For instance, this phenomenon helps maintain a reasonable temperature in both small electronic devices and large buildings. No matter the application area, design engineers can use the COMSOL Multiphysics® software to model natural convection in air for both 2D and 3D geometries.

Weiterlesen

Chandan Kumar January 4, 2018

A sphere slightly lighter than water is dropped into a small liquid-filled beaker. How do you model the resulting shape of the water surface and the motion of the sphere as it floats on the surface? In this blog post, we demonstrate how to model this system in the COMSOL Multiphysics® software. Although we are considering the case of a small sphere, the technique discussed here can be applied to other larger shapes as well.

Weiterlesen

Kategorien

Phillip Oberdorfer December 15, 2017

The physics behind filling a water balloon seem simple at first glance, but involve a rather complex interplay of fluid flow and a nonlinear hyperelastic material. Fortunately, it is easy to set up and solve this type of model in the COMSOL Multiphysics® software. Let’s see how…

Weiterlesen

Brianne Costa November 22, 2017

There is a lot we know about the brain, and a lot we don’t. Optogenetics is a relatively new area of study in which light is used to stimulate brain activity and study neurological behavior. Stimulating neurons with light is more precise than electrical stimulation — and safer. Researchers from Massachusetts Institute of Technology (MIT) used simulation to design an optical probe that can be implanted into the brain to stimulate nerve impulses.

Weiterlesen

Kategorien

Caty Fairclough November 10, 2017

Skyscrapers, highway bridges, and other heavy manmade structures often use drilled shafts. Despite their widespread application, these shafts suffer from anomalies due to suboptimal designs and issues with the flow of concrete. To better understand such problems and improve the concreting process for drilled shafts, researchers used the COMSOL Multiphysics® software. Here, we take a peek at their preliminary research and findings.

Weiterlesen

Kategorien

Fanny Littmarck October 26, 2017

Important question: If you pour hot coffee into a vacuum flask, how long will it stay warm? There are two different modeling approaches for studying this scenario, but the more accurate method is also more computationally expensive. Let’s see what they are and when they are appropriate — and hopefully find an answer to the question.

Weiterlesen


Kategorien


Tags

1 2 3 10