Where to Find Application Builder Tutorial Apps

Fanny Littmarck | December 10, 2014

With the release of the Application Builder, we also bring you tutorial apps for getting started. You can find these applications both within the Application Library in the software and online in the Model Gallery. This is your resource on where to find the tutorials, including how to run the Application Library update.


Andrew Griesmer | December 9, 2014

Here’s a question for all you electromagnetics-focused simulation engineers out there: Have you ever looked in envy at your structural, fluid, and chemical counterparts as they mesh their models with the click of a button, while you struggle to mesh your infinite elements or perfectly matched layers? Well, now you too can enjoy automatic meshing with a click (or two). Let me show you how.

Bridget Cunningham | December 5, 2014

When the Newtonian telescope was first developed in 1668, it was recognized as the earliest operating reflecting telescope. With its low cost and simplistic design, this optical system became a favorable alternative to refracting telescopes, and the technology continues to be widely used today. Using the Ray Optics Module, we can analyze ray propagation within this type of telescope system.


Matt Pooley | December 3, 2014

Bright light-emitting diodes (LEDs) are revolutionizing the lighting industry and blue LEDs in particular are ushering in a new age of widespread efficient LED lighting. The importance of blue LEDs was marked by this year’s Nobel Prize in physics, which went to the inventors. But, because bright LEDs are driven by larger currents, they suffer from reduced efficiency — a phenomenon known as LED droop. Using multiphysics simulations, we can investigate and understand the mechanisms behind LED efficiency.

Lexi Carver | December 1, 2014

In the previous installment of the postprocessing series, we showcased techniques for visualizing results on cross-sectional slices. Now, we’ll discuss how contour and isosurface plots can be used to show quantities on a series of lines or surfaces. Though they’re usable in many applications (from heat transfer to acoustics), we’ll specifically look at how they can show mechanical stress in a driving pulley and sound pressure levels in a loudspeaker.

Niklas Rom | November 27, 2014

In earlier versions of COMSOL Multiphysics, it was cumbersome to connect 1D pipes to 3D flow domains. However, did you know that a new feature in COMSOL Multiphysics version 5.0 now allows you to easily accomplish this? Let me demonstrate how this feature works.


Nancy Bannach | December 8, 2014

When you think of evaporation, you probably think of the cup on your desk that spreads the aroma of coffee or tea. But evaporation is also a process with many industrial and scientific applications, ranging from meteorology to food processing. This blog entry is the beginning of a new blog series on modeling evaporative cooling. Here, we introduce the basic concepts using your coffee cup as an example.

Bridget Cunningham | December 4, 2014

Attendees at the COMSOL Conference 2014 Boston had the opportunity to hear keynote speeches from COMSOL Multiphysics® simulation software users Oak Ridge National Laboratory and WiTricity. Both engaging and highly informative, these presentations offered an interesting mix of notable multiphysics applications.


Daniel Smith | December 2, 2014

We just launched a new app for you to download from the Application Library update. This app is a dedicated tool for modeling the flow and pressure distribution inside a network of connected pipes. Engineers in semiconductor processing could use a tool like this to test a given design and ensure it will meet specification before prototyping the physical device. Here, I’ll give you some background info and walk you through how this app works.

Walter Frei | November 28, 2014

Whenever you are modeling the geometry that you will use for your COMSOL Multiphysics analysis, either with the native CAD creations tools in the COMSOL software or using another CAD system, you may end up with a geometry that has more features than you really need. Here, we will look at a set of features called Virtual Operations that will let you quickly and easily simplify any CAD data in preparation for modeling and meshing.

Christopher Boucher | November 26, 2014

With the release of COMSOL Multiphysics version 5.0, the Particle Tracing Module now includes a series of features called Accumulators, which can be used to couple the results of a particle tracing simulation to other physics interfaces. The accumulated variables may represent any physical quantity and can be defined either within domains or on boundaries, making them extremely flexible. Here, I will explain the different types of accumulators and their applications in particle tracing and ray optics models.

1 28 29 30 31 32 101