Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Inter-study comparison capabilities?

Please login with a confirmed email address before reporting spam

I'd like to compare results from two studies I have set up, but have not had any luck getting COMSOL to perform operations like finding the difference in temperature field between two separate studies. I could export the results but I'd like to use the visualization functionality in COMSOL to show a differenced surface. Has anyone had any luck with this?

Thanks.

1 Reply Last Post 14.01.2011, 06:58 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.01.2011, 06:58 GMT-5
Hi
You would need to have them as two models in the same file,. Ten I believe you could plot a T1t - T2t with T1 in one model and T2 in another

--
Good luck
Ivar
Hi You would need to have them as two models in the same file,. Ten I believe you could plot a T1t - T2t with T1 in one model and T2 in another -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.