Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Converting parametric surface to solid in Comsol

Posted 02.10.2017, 16:34 GMT-4 1 Reply

Samuel Ayinde
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have this attached parametric surface in Comsol. I wanted to convert it to solid by using "Convert to solid" but it was not working. How can I go about it? Thank you.

Attachments:

1 Reply Last Post 02.10.2017, 17:21 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 02.10.2017, 17:21 GMT-4
Updated: 8 years ago 03.10.2017, 13:53 GMT-4

"Convert to solid" is used to convert the space enclosed by a bunch of surfaces into a volume. Here you only have one surface, so it's not what you're looking for.

What are you trying to do?

If you are trying to turn space located above or below the surface into a volume, then use the approach presented by the Mount St Helens example here: https://www.comsol.com/support/knowledgebase/838/

If you are trying to thicken the surface into a volume, then use the Thicken capability. This requires the Design Module (https://www.comsol.com/design-module).

Best, Jeff

-------------------
Jeff Hiller
"Convert to solid" is used to convert the space enclosed by a bunch of surfaces into a volume. Here you only have one surface, so it's not what you're looking for. What are you trying to do? If you are trying to turn space located above or below the surface into a volume, then use the approach presented by the Mount St Helens example here: https://www.comsol.com/support/knowledgebase/838/ If you are trying to thicken the surface into a volume, then use the Thicken capability. This requires the Design Module (https://www.comsol.com/design-module). Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content