Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Convergence issues caused by sudden change in storage term, Two phase flow, Coupled HM model

Please login with a confirmed email address before reporting spam

Dear all,

I am running a coupled HM model for the two phase flow in poroue media. What I want to achieve a gas breakthrough event which means the gas pressure at the upstream side would reach a peak value before declining to a certain value because of the fracture development. Thus, I have developed a permeability model which increases rapidly once a certain strain. As the storage term in the mass balance equation is a function of the permeability model, this term will also experience a significant change. This equation is shown as

S×rho×dp/dt+div(rho×v)=Qm

where S is the storage term, rho is density, v is Darcy's velocity, Qm is the mass source.

Due to this rapid change in S, the whole model is hard to reach convergence. Could you please give me an idea how to solve such an issue?

Thank you so much for your help.

-------------------
Yu Zhang

0 Replies Last Post 22.11.2017, 14:48 GMT-5
COMSOL Moderator

Hello Yu Zhang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.