Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Sweep forms a grid

Posted 21.12.2017, 09:05 GMT-5 Geometry, Mesh 1 Reply

鹏 叶
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi，

I am new to Comsol and know very little about different features of the software. When I want to form a grid by sweeping, the software prompts for an unsupported link surface topology. what should I do? thank you.

1 Reply Last Post 21.12.2017, 16:32 GMT-5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 21.12.2017, 16:32 GMT-5

Swept meshing is a powerful technique but it requires that several condition be met. You will find them listed in the Reference Manual for COMSOL Multiphysics, version 5.3a, page 556. All manuals are accessible through File > Help > Documentation.

The error message suggests that you may be in a situation similar to the example on page 546 of that same manual, in which case the same type of virtual operation discussed there may apply to your work as well. It's hard to say for sure without having access to your .mph file.

Best regards,

Jeff

-------------------
Jeff Hiller
Swept meshing is a powerful technique but it requires that several condition be met. You will find them listed in the Reference Manual for COMSOL Multiphysics, version 5.3a, page 556. All manuals are accessible through File > Help > Documentation. The error message suggests that you may be in a situation similar to the example on page 546 of that same manual, in which case the same type of virtual operation discussed there may apply to your work as well. It's hard to say for sure without having access to your .mph file. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content