Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

surface charge density

Please login with a confirmed email address before reporting spam

hi,

I have placed a water drop between two electrodes and got the results, now I want to plot the charge density in my domain. there is nothing for charge in default parameters of the electrostatic (es) plot groups.

what does this mean ? How can I plot it ?

I just applied two voltage boudary condition in my problem.


best

5 Replies Last Post 16.01.2012, 17:07 GMT-5
COMSOL Moderator

Hello Osameh Ghazian

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.01.2012, 09:49 GMT-5
I would also love to be able to plot charge density in my results, anyone know how?
I would also love to be able to plot charge density in my results, anyone know how?

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.01.2012, 09:57 GMT-5
hi
in ES (electrostatic) module, Polarization is the charge density and it is available in post processing
hi in ES (electrostatic) module, Polarization is the charge density and it is available in post processing

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.01.2012, 10:08 GMT-5
HI

but in ES Electro-static charge density isn't it "es.D" ?

or are you in EC electric currents, with air and water conductivity and looking for "ec.rhoq" ?

--
Good luck
Ivar
HI but in ES Electro-static charge density isn't it "es.D" ? or are you in EC electric currents, with air and water conductivity and looking for "ec.rhoq" ? -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.01.2012, 10:58 GMT-5
I think D is the Displacement vector not the charge density. In EC there is charge density in post processing but in ES, I could not find anything beside Polarization.
I think D is the Displacement vector not the charge density. In EC there is charge density in post processing but in ES, I could not find anything beside Polarization.

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.01.2012, 17:07 GMT-5
Hi

I fully agree D is the displacement, still units C/m^2

--
Good luck
Ivar
Hi I fully agree D is the displacement, still units C/m^2 -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.