Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Finding the normal vector of the surface

Please login with a confirmed email address before reporting spam

Hi,

Is there anyway to find the normal vector of the surface in Comsol ? especially when you are using level set methods in CFD module ?

Best

1 Reply Last Post 13.08.2011, 13:09 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13.08.2011, 13:09 GMT-4
Hi

you have the Definitions - Boundary coordinates (pls check carefully your frame) for your geometry, but not sure now how this is related/limited for he "level set method"
I'm currently on holidays, without COMSOL on my laptop, so I would have to get back to the office first to try something out ;)

--
Good luck
Ivar
Hi you have the Definitions - Boundary coordinates (pls check carefully your frame) for your geometry, but not sure now how this is related/limited for he "level set method" I'm currently on holidays, without COMSOL on my laptop, so I would have to get back to the office first to try something out ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.