Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Basic questions about ewfd in wave optics.

Please login with a confirmed email address before reporting spam

I noticed several examples about waveguides, such as *step_index_fiber_bend *, do not have incentive port. All the boundary is PEC. How come? Where does the electric field or incident wave come from? Is that because ewfd has its own way to excite a wave so we do not need to add one? Thanks very much!


2 Replies Last Post 05.02.2019, 21:45 GMT-5
Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 03.02.2019, 16:31 GMT-5

I don't have that particular module, but I am willing to bet that the example you are mentioning is configured to perform mode analyses. There is a "step index fiber" application in the RF module which is a mode-finding model. In that case, there is no need for a user-supplied port. You are simply finding the modes.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
I don't have that particular module, but I am willing to bet that the example you are mentioning is configured to perform mode analyses. There is a "step index fiber" application in the RF module which is a mode-finding model. In that case, there is no need for a user-supplied port. You are simply finding the modes.

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 05.02.2019, 21:45 GMT-5

Thanks. I got it!

Thanks. I got it!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.