Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Failed to Evaluate Variable Jacobian

Please login with a confirmed email address before reporting spam

Hello,

I'm using "Laminar Flow" and "Transport of Diluted Species".

After I successfully simulated a few times, I just added "Rectangle" variable to inlet. I typed in the inlet as "10*rect1(t[1/s])".

After that I get the same message like this.

Failed to evaluate variable Jacobian.
- Variable: t
- Geometry: 1
- Boundary: 1 7 13 19 25

Please let me know if anyone knows how to solve it.

Thanks.

1 Reply Last Post 13.01.2012, 17:06 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13.01.2012, 17:06 GMT-5
Hi

probably the rise time of your rectangle is too rapid, compared to the time stepping, and perhaps mesh density, particularly if you have diffusion with a rapid step.

Time stepping, mesh size and diffusivity must match to a certain degree, check your doc, or classical PDE textbooks on diffusion

--
Good luck
Ivar
Hi probably the rise time of your rectangle is too rapid, compared to the time stepping, and perhaps mesh density, particularly if you have diffusion with a rapid step. Time stepping, mesh size and diffusivity must match to a certain degree, check your doc, or classical PDE textbooks on diffusion -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.