Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

step stationary

Please login with a confirmed email address before reporting spam

Hi

what is the role of the stationary phase in study 2 in the example inductor_in_circuit?

tank you

1 Reply Last Post 02.06.2012, 16:50 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 02.06.2012, 16:50 GMT-4
Hi

Have you read the PDF doc of the model ?
It's explained at the bottom of p4, it is essentially there to give a good initial values for the time series to be in a steady state condition, to avoid initial transient ringing

--
Good luck
Ivar
Hi Have you read the PDF doc of the model ? It's explained at the bottom of p4, it is essentially there to give a good initial values for the time series to be in a steady state condition, to avoid initial transient ringing -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.