Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Exporting the result data

Posted 14.06.2012, 13:20 GMT-4 Results & Visualization Version 4.2a 1 Reply

Akshay Kale
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello !!

Can anyone please help me on exporting the data obtained by solving equations in COMSOL, say the velocity or temperature values at all the co-ordinates, into a text file or an excel spreadsheet, or a post processing software such as CFD-Post or Tecplot ?


Thanks a lot


Akshay S. Kale
1 Reply Last Post 14.06.2012, 14:25 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.06.2012, 14:25 GMT-4
Hi

there are many export means, check the doc nd search the forum. In summary, you have the Data-set sub node export, or cut plane - export, here you have different ways to define the grid and the export format, then Export node and save data.
You can also use the Results - Derived Variables to make tables and export these, or make plots and export the plot or the plot data, depending on which snode/sub node you select for applying the command. most export commands make an entry in the Export node, whre you can define file name, format, grid distribution, interpoaltion functins etc

--
Good luck
Ivar
Hi there are many export means, check the doc nd search the forum. In summary, you have the Data-set sub node export, or cut plane - export, here you have different ways to define the grid and the export format, then Export node and save data. You can also use the Results - Derived Variables to make tables and export these, or make plots and export the plot or the plot data, depending on which snode/sub node you select for applying the command. most export commands make an entry in the Export node, whre you can define file name, format, grid distribution, interpoaltion functins etc -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content