Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Full width at half maximum plot
Posted 26.06.2012, 06:03 GMT-4 Fluid & Heat Version 4.3 2 Replies
Please login with a confirmed email address before reporting spam
I am new to comsol and I am using 4.3. I would like to know how to mark the maximum value and half maximum along the y axis in a line graph. I would also like to draw the full width at half maximum. I would also want to extract the three and develop a table. I have attached the required file.Could anyone help me? Please!
Attachments:
2 Replies Last Post 12.07.2012, 06:16 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
interesting question, I'm not sure if it's that easy in COMSOL, certainly possible via Matlab or Java.
Within COMSOL you have the min() & max() operators for any variable (check the doc, they accept also a second argument, you need to search a bit deeper but its descirbed in the help)
For fields: min(V,x) returns the "x" coordinate of the minimum of the V(x,y,z,t) field, this work for the space coordinates, but I have never really tried for the time coordinate "t".
Now if you have defined a varibale my_var(t) and the max(my_var,t) returns the value for t, and defined
my_var_max = max(my_var(t)),
then you can define a
my_temp_var = my_var(t)*(my_var(t)< my_var_max / 2)
and search the max below and above the t_at_my_var_max.
There must be an easier way ;) but I cannot really identify it like, that within COMSOL
--
Good luck
Ivar
interesting question, I'm not sure if it's that easy in COMSOL, certainly possible via Matlab or Java.
Within COMSOL you have the min() & max() operators for any variable (check the doc, they accept also a second argument, you need to search a bit deeper but its descirbed in the help)
For fields: min(V,x) returns the "x" coordinate of the minimum of the V(x,y,z,t) field, this work for the space coordinates, but I have never really tried for the time coordinate "t".
Now if you have defined a varibale my_var(t) and the max(my_var,t) returns the value for t, and defined
my_var_max = max(my_var(t)),
then you can define a
my_temp_var = my_var(t)*(my_var(t)< my_var_max / 2)
and search the max below and above the t_at_my_var_max.
There must be an easier way ;) but I cannot really identify it like, that within COMSOL
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Thank you very much.
Melvin
Thank you very much.
Melvin