Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modal Mass calculation

Please login with a confirmed email address before reporting spam

Hi

Is it possible to calculate the modal mass for a particular mode shape? Can someone please explain how to do it.

9 Replies Last Post 28.12.2012, 13:42 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.08.2012, 16:31 GMT-4
Hi

in the eigenfrequency solver sequence (quite deep down in the solver tree), you have the option for the normalisation of the eigenvectors/frequencies, such as RMS, and model mass, once changed you need to rerun your solver, then your mass participation factors (in kg but units are not mentioned) are the SQUARE of the model participation factors (see the Structural doc)

--
Good luck
Ivar
Hi in the eigenfrequency solver sequence (quite deep down in the solver tree), you have the option for the normalisation of the eigenvectors/frequencies, such as RMS, and model mass, once changed you need to rerun your solver, then your mass participation factors (in kg but units are not mentioned) are the SQUARE of the model participation factors (see the Structural doc) -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17.09.2012, 13:10 GMT-4
I have the participation factors (u,v,w) for a particular mode. I want to calculate the effective or modal mass for that mode. Really confused about that. Is it mass participation factor or modal participaton factor?
I have the participation factors (u,v,w) for a particular mode. I want to calculate the effective or modal mass for that mode. Really confused about that. Is it mass participation factor or modal participaton factor?

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17.09.2012, 13:59 GMT-4
Hi

the square of the partcpation factor is the mass, ifyou sum the squares for many modes you will get the total mass per direction

I's described somewhere in the doc too (try a search ;)

--
Good luck
Ivar
Hi the square of the partcpation factor is the mass, ifyou sum the squares for many modes you will get the total mass per direction I's described somewhere in the doc too (try a search ;) -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17.09.2012, 19:40 GMT-4
Hi

Thanks for the reply.

Just to clear my head.

For example,
for a particular mode...

MPF in u direction=a
MPF in v direction=b
MPF in w direction=c

so the effective mass for that mode would be= a^2+b^2+c^2

please correct me if I'm wrong.
Thanks
Hi Thanks for the reply. Just to clear my head. For example, for a particular mode... MPF in u direction=a MPF in v direction=b MPF in w direction=c so the effective mass for that mode would be= a^2+b^2+c^2 please correct me if I'm wrong. Thanks

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.09.2012, 02:42 GMT-4
Hi

The effective masses are per cartesian orthogonal directions, and each add up to Mass ="total mass" = int1(solid.rho) over all domains.

so when I ask for the mass participation factor I use (MPF_mod1.u)^2/Mass*100 to get the % of total mass per mode

so if you take a canteliever and see 20% in u (or x), at one frequency and 30% in v (or y) at another, you can see that this particular mode has its motion predominantly along x, respective y.

--
Good luck
Ivar
Hi The effective masses are per cartesian orthogonal directions, and each add up to Mass ="total mass" = int1(solid.rho) over all domains. so when I ask for the mass participation factor I use (MPF_mod1.u)^2/Mass*100 to get the % of total mass per mode so if you take a canteliever and see 20% in u (or x), at one frequency and 30% in v (or y) at another, you can see that this particular mode has its motion predominantly along x, respective y. -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 09.10.2012, 12:07 GMT-4
Hi

I have a total mass of 2.217E-5 kg for clamped edge circular plate.

My MPF for the first mode of vibration are

MPFu= 4.703E-8
MPFv=1.14201E-8
MPFw=0.00343


so the modal mass I get is: (MPFu)^2+(MPFv)^2+(MPFw)^2=1.17649E-5 kg

Now the problem is I don't know whether it is correct or not as don't have any analytical results to compare with. Also, as COMSOL scales its variable, are these MPFs scaled?
Hi I have a total mass of 2.217E-5 kg for clamped edge circular plate. My MPF for the first mode of vibration are MPFu= 4.703E-8 MPFv=1.14201E-8 MPFw=0.00343 so the modal mass I get is: (MPFu)^2+(MPFv)^2+(MPFw)^2=1.17649E-5 kg Now the problem is I don't know whether it is correct or not as don't have any analytical results to compare with. Also, as COMSOL scales its variable, are these MPFs scaled?

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 09.10.2012, 14:54 GMT-4
Hi

i believe you should add up the square of the modal masses for the first N modes direction by direction, then it should get to the total mass, if you take enough modes.

What I do is to calculate the total mass by an variable and an integration of material.rho over all domain(s) and then I use the Derived Values - Global Evaluation to give

MPF_mod1.u^2 / TotalMass*100

to have the mass participation factors in % of the total mas (per direction, separately in u,v,w)

--
Good luck
Ivar
Hi i believe you should add up the square of the modal masses for the first N modes direction by direction, then it should get to the total mass, if you take enough modes. What I do is to calculate the total mass by an variable and an integration of material.rho over all domain(s) and then I use the Derived Values - Global Evaluation to give MPF_mod1.u^2 / TotalMass*100 to have the mass participation factors in % of the total mas (per direction, separately in u,v,w) -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28.12.2012, 10:54 GMT-5
Hello Ivar,

I would like to add one question to the discussion.

After running my simulation and computing the effective masses for each direction, let's call them m_eff_x, m_eff_y, m_eff_z, I would like to combine them in order to obtain a meaningful effective mass for each mode i (something like sum over all directions instead of sum over all modes -> m_eff_i = function(m_eff_x_i, m_eff_y_i, m_eff_z_i) ).

Does such a combination exist? Which formula defines it?

Thank you very much for your help!

Best regards
luca
Hello Ivar, I would like to add one question to the discussion. After running my simulation and computing the effective masses for each direction, let's call them m_eff_x, m_eff_y, m_eff_z, I would like to combine them in order to obtain a meaningful effective mass for each mode i (something like sum over all directions instead of sum over all modes -> m_eff_i = function(m_eff_x_i, m_eff_y_i, m_eff_z_i) ). Does such a combination exist? Which formula defines it? Thank you very much for your help! Best regards luca

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28.12.2012, 13:42 GMT-5
Hi

normally the effective mass variable are normalised such that the sum of the square of each participative mass value, per direction adds up to the total mass of the object, so what I often do is to normalise mode_mass_x^2 / Total_Mass and check that I select sufficient modes to get 70-80% or more of the total mass per direction

--
Good luck
Ivar
Hi normally the effective mass variable are normalised such that the sum of the square of each participative mass value, per direction adds up to the total mass of the object, so what I often do is to normalise mode_mass_x^2 / Total_Mass and check that I select sufficient modes to get 70-80% or more of the total mass per direction -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.