Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Surface evaporation, condensation

Posted 15.11.2012, 07:45 GMT-5 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 7 Replies

SMHH
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I want to model surface evaporation from a water flow at 40 Celsius and observe the consequent condensation on a cold surface. Can you help me with the model that I should use? I could not find anything similar in the online available models.

Thanks,
SMHH
7 Replies Last Post 21.03.2013, 01:22 GMT-4
Ross Pally
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12.12.2012, 16:09 GMT-5
Hi Dear,
I have similar problem! did u find the solution or any advantages?
You can email me to and we can exchange experience :) : rosspally@gmail.com
Hi Dear, I have similar problem! did u find the solution or any advantages? You can email me to and we can exchange experience :) : rosspally@gmail.com
SMHH
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 08.01.2013, 05:47 GMT-5
Hi Ross,

Sorry, I saw your message today. I am working on the evaporation through transport of diluted species. This very simple tutorial may help you:

www.che.wsu.edu/~suha/ChE310/comsol/mass(M).pdf

For the phase change (condensation), I did not make any progress yet. But this tutorial might be helpful:

www.comsol.com/showroom/gallery/474/

Please let me know if you have any progress too.

Thanks,
SMHH
Hi Ross, Sorry, I saw your message today. I am working on the evaporation through transport of diluted species. This very simple tutorial may help you: http://www.che.wsu.edu/~suha/ChE310/comsol/mass(M).pdf For the phase change (condensation), I did not make any progress yet. But this tutorial might be helpful: http://www.comsol.com/showroom/gallery/474/ Please let me know if you have any progress too. Thanks, SMHH
Alfredo Gutierrez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15.03.2013, 20:11 GMT-4
Hi SMHH,

I was wondering if you made any progress on modeling both evaporation or condensation? The first link you posted no longer works.

Please let me know.

Regards,
Alfredo
Hi SMHH, I was wondering if you made any progress on modeling both evaporation or condensation? The first link you posted no longer works. Please let me know. Regards, Alfredo
Yevgeniy Davletshin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15.03.2013, 23:35 GMT-4
The link is working you just need to copy and paste it.



Hi SMHH,

I was wondering if you made any progress on modeling both evaporation or condensation? The first link you posted no longer works.

Please let me know.

Regards,
Alfredo

The link is working you just need to copy and paste it. [QUOTE] Hi SMHH, I was wondering if you made any progress on modeling both evaporation or condensation? The first link you posted no longer works. Please let me know. Regards, Alfredo [/QUOTE]
Aung Myat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20.03.2013, 20:51 GMT-4
Hi Ross,
The first link does not work. please do me a favor to update that link.

--
Aung Myat
Hi Ross, The first link does not work. please do me a favor to update that link. -- Aung Myat
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.03.2013, 00:54 GMT-4
Hi

read carefully Yevgeniy's answer jus above: use cut&paste of the whole file name text ;)

--
Good luck
Ivar
Hi read carefully Yevgeniy's answer jus above: use cut&paste of the whole file name text ;) -- Good luck Ivar
Aung Myat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.03.2013, 01:22 GMT-4
Hi Ivar,
I have overlooked it,
Thank

--
Aung Myat
Hi Ivar, I have overlooked it, Thank -- Aung Myat

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content