Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Change coordinate axis label

Please login with a confirmed email address before reporting spam

Hi Guys,

Does anyone know how to change the coordinate axes labels in COMSOL 4.3?

As we know, if we have a 3-D model and click 'Default 3-D view', we can observe that X axis is in the upper right direction, Y axis is in upper left direction and Z axis is in up direction.

So whether can I exchange the labels of X and Y axes? I mean I want to make X axis in upper left direction and Y axis in upper right direction. I don't like this. I have drawn a very complex structure, so I don't want to redraw my model.


Thank you for helping!


1 Reply Last Post 04.12.2012, 14:02 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 04.12.2012, 14:02 GMT-5
Hi

you should not rename the axis variables, but to change your "view orientation", check the view tab ;)

--
Good luck
Ivar
Hi you should not rename the axis variables, but to change your "view orientation", check the view tab ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.