Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Variable heat capacity

Please login with a confirmed email address before reporting spam

Hi!

I have measured Cp for metal alloy. It has significant temperature dependence. Is it possible to use Cp(T) instead of constant Cp for transient heat transfer problems?

Thanks!

1 Reply Last Post 30.01.2013, 13:13 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30.01.2013, 13:13 GMT-5
Hi
Ccertainly, if you look carefully in the default materials there should be some with T and others even with pA dependence of the material properties.
You add an imported interpolation function (under the maerial node) to mimic your Cp(T) dependece, just be sure you get the SI units correct

When you have added your material to your model, and finme tuned it, you might save it in your own "private" material library for laer retrival

--
Good luck
Ivar
Hi Ccertainly, if you look carefully in the default materials there should be some with T and others even with pA dependence of the material properties. You add an imported interpolation function (under the maerial node) to mimic your Cp(T) dependece, just be sure you get the SI units correct When you have added your material to your model, and finme tuned it, you might save it in your own "private" material library for laer retrival -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.