Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Integration / Integration Order

Please login with a confirmed email address before reporting spam

Hello there,

I'm performing a boundary integration to get normal current density. I have used a swept mesh over my entire device. Does it imply I have to change the integration order? I get a value for integration order 1 and for integration orders: 2, 3 and "Auto" I get another higher value (2,3 and "Auto" release same value). For some reason I think order 1 release a value more realistic.

BTW: The function involved in this boundary is of the form x cosh (y) where x and y variables are coming from solutions of other modules.

Thanks in advance,

-Omar

2 Replies Last Post 06.05.2010, 01:34 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 05.05.2010, 01:37 GMT-4
Hi

I consider the integration order as basically step integration (1), triangular (2) (I might be off by one havnt checked) or higher order polynomial fit integration, so I usually use higher orders such as 2 or 4

But it's true one could check ona second or third order equation just as a verification

Have fun Comsoling
Ivar
Hi I consider the integration order as basically step integration (1), triangular (2) (I might be off by one havnt checked) or higher order polynomial fit integration, so I usually use higher orders such as 2 or 4 But it's true one could check ona second or third order equation just as a verification Have fun Comsoling Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 06.05.2010, 01:34 GMT-4
Ivar: Thanks!
Ivar: Thanks!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.