Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Store Solution and Apply as a Boundary Condition in Subsequent Run

Please login with a confirmed email address before reporting spam

Hi

Does anybody knows how to apply the results obtained at the outlet of first run back to the inlet as an inlet bounrady condition? Actually the objective is to study a flow in a long clyinder by making it in small cylinders and repeating the BCs from solution back to the inlet. This will save the memory and help in reducing the size of geometry while getting the same results which would actually be obtained in a long clyinder simulation.

regards
Naveed

2 Replies Last Post 21.04.2012, 04:14 GMT-4
COMSOL Moderator

Hello Naveed Akhtar

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20.04.2012, 16:38 GMT-4
Hi, Have you been able to figure this out? I am having the same problem

Thanks,
Dan
Hi, Have you been able to figure this out? I am having the same problem Thanks, Dan

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.04.2012, 04:14 GMT-4
Hi
take a look at the periodic boundary conditions, I believe that is what you could consider

--
Good luck
Ivar
Hi take a look at the periodic boundary conditions, I believe that is what you could consider -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.