Die Application Gallery bietet COMSOL Multiphysics® Tutorial- und Demo-App-Dateien, die für die Bereiche Elektromagnetik, Strukturmechanik, Akustik, Strömung, Wärmetransport und Chemie relevant sind. Sie können diese Beispiele als Ausgangspunkt für Ihre eigene Simulationsarbeit verwenden, indem Sie das Tutorial-Modell oder die Demo-App-Datei und die dazugehörigen Anleitungen herunterladen.
Suchen Sie über die Schnellsuche nach Tutorials und Apps, die für Ihr Fachgebiet relevant sind. Beachten Sie, dass viele der hier vorgestellten Beispiele auch über die Application Libraries zugänglich sind, die in die COMSOL Multiphysics® Software integriert und über das Menü File verfügbar sind.
This model showcases how to use fibers in thin layers to model thin anisotropic composites embedded in a solid without explicitly drawing either the layer of material or the reinforcing fibers. Here, it is used to model steel cords in tire belts that are used to provide structural ... Mehr lesen
Prior to the reliability testing, surface-mount devices (SMDs) are required to go through a preconditioning process, which represents the effects of storage and the typical reflow operation in the following board assembly process. During the preconditioning process, test samples usually ... Mehr lesen
Predicting the noise radiation from a dynamic system gives designers insight into the behavior of moving mechanisms early in the design process. For example, consider a gearbox in which the change in the gear mesh stiffness causes vibrations. These vibrations are transmitted to the ... Mehr lesen
This example of a simple axisymmetric condenser microphone includes all the relevant physics and determines the microphone sensitivity as well as microphone capacitance for the specific simplified microphone geometry and material parameters. It solves a fully coupled multiphysics model ... Mehr lesen
This example shows how to compute thermally induced stresses in a turbine stator blade using the Thermal Stress, Solid interface. The conditions within gas turbines are extreme. The pressure can be as high as 40 bar, and the temperature more than 1000 K. Any new component must therefore ... Mehr lesen
Interfacial failure or delamination in a composite material can be simulated with a cohesive zone model (CZM). A key ingredient of a cohesive zone model is a traction-separation law that describes the softening in the cohesive zone near the delamination tip. This example shows the ... Mehr lesen
A tube connection consisting of a flange with eight prestressed bolts is subjected to a set of loads: an internal pressure, an axial force, and an external bending moment. Due to two symmetry planes, it is sufficient to only consider one quarter of the full geometry. The study ... Mehr lesen
Dies ist das Modell eines verschlossenen Gehörgangssimulators (eines generischen 711-Kopplers). Abgesehen von bestimmten Details entspricht die Geometrie dem Brüel & Kjær Ear Simulator Type 4157. Die realen Koppler werden zur Simulation der Akustik eines standardisierten ... Mehr lesen
In diesem Tutorial wird das Schwingungsverhalten einer kleinen Aluminiumplatte mit vier Wellenleiterstrukturen analysiert. Dies ist ein Beispiel für eine strukturelle Komponente, die sich in einem Gerät befindet, in dem sich elastische Wellen ausbreiten, wie zum Beispiel ein ... Mehr lesen
Ein Getriebe dient der Kraftübertragung von einem Motor auf die zugehörigen Räder oder Zahnräder, was zu einer Geräuschabstrahlung in die Umgebung führen kann. Dies ist auf die Übertragung unerwünschter lateraler und axialer Kräfte auf die Lager und das Gehäuse zurückzuführen, während ... Mehr lesen
