Die Application Gallery bietet COMSOL Multiphysics® Tutorial- und Demo-App-Dateien, die für die Bereiche Elektromagnetik, Strukturmechanik, Akustik, Strömung, Wärmetransport und Chemie relevant sind. Sie können diese Beispiele als Ausgangspunkt für Ihre eigene Simulationsarbeit verwenden, indem Sie das Tutorial-Modell oder die Demo-App-Datei und die dazugehörigen Anleitungen herunterladen.
Suchen Sie über die Schnellsuche nach Tutorials und Apps, die für Ihr Fachgebiet relevant sind. Beachten Sie, dass viele der hier vorgestellten Beispiele auch über die Application Libraries zugänglich sind, die in die COMSOL Multiphysics® Software integriert und über das Menü File verfügbar sind.
A solidly-mounted resonator (SMR) is a piezoelectric MEMS resonator formed on top of an acoustic mirror stack deposited on a thick substrate. This tutorial shows how to simulate an SMR in 2D. In this example, the eigenmodes were computed and the frequency response from 500 to 1200 MHz ... Mehr lesen
This tutorial example models the currents and the concentration of dissolved metal ions in a battery (corrosion cell) made from an orange and two metal nails. This type of battery is commonly used in chemistry lessons. Instead of an orange, lemons or potatoes can also be used. Mehr lesen
Ein Tonpilz-Schallwandler wird für relativ niederfrequente Schallabstrahlung mit hoher Leistung verwendet. Er ist eine der beliebtesten Schallwandler-Konfigurationen für SONAR-Anwendungen. Der Schwinger besteht aus piezokeramischen Ringen, die zwischen einer Kopfmasse und einer Endmasse ... Mehr lesen
This model demonstrates the analysis of lightning surges on high voltage transmission line towers. Lightning carrying a current of 10 kA struck one of the tower's shielded wires. The induced voltage at the three-phase conductors are computed. Some highlights of this model: Perform ... Mehr lesen
This model showcases how to use fibers in thin layers to model thin anisotropic composites embedded in a solid without explicitly drawing either the layer of material or the reinforcing fibers. Here, it is used to model steel cords in tire belts that are used to provide structural ... Mehr lesen
This tutorial example shows how to use the Electric Currents in Shells interface together with Magnetic Field interface to compute the resistance and inductance of a planar PCB coil in the stationary regime. Mehr lesen
Reflective mufflers are best suited for the low-frequency range where only plane waves can propagate in the system, while dissipative mufflers with fibers are efficient in the mid- to high-frequency range. Dissipative mufflers based on flow losses, on the other hand, also work at low ... Mehr lesen
At the macroscopic level, systems usually mix fluids using mechanical actuators or turbulent 3D flow. At the microscale level, however, neither of these approaches is practical or even possible. This model demonstrates the mixing of fluids using laminar-layered flow in a MEMS mixer. This ... Mehr lesen
Solarkonzentrator-/ Cavity-Receiver-Systeme können dazu verwendet werden, die einfallende Sonnenstrahlung auf einen kleinen Bereich zu fokussieren und intensive Wärme zu erzeugen, die dann in elektrische oder chemische Energie umgewandelt werden kann. Eine gängige Kennzahl für ... Mehr lesen
Dieses Tutorial zeigt, wie Sie vollständige vibro-elektroakustische 3D-Multiphysik-Modelle von Lautsprechern am besten lösen. Das Modell basiert auf einer 3D-Darstellung des bestehenden achsensymmetrischen 2D-Modells loudspeaker_driver aus der Application Library der Software. Der Aufbau ... Mehr lesen