Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.


Sehen Sie sich die Kollektion für die COMSOL Conference 2023 an

2009 - Milanx

Finite Element Analysis of Thermal Fatigue in Thermal Barrier Coatings

U. Bardi[1], C. Borri[1], A. Fossati[1], A. Lavacchi[1], and I. Perissi[1]
[1]Dipartimento di Chimica, Università degli Studi di Firenze, Sesto Fiorentino, FI, Italy

A Finite element model of plasma sprayed TBC’s was developed to estimate the stress induced by thermal cycling experiments. A heat transfer analysis was performed to evaluate the temperature distribution on the specimen during the cooling under an impinging air jet; temperature ... Mehr lesen

Thermal Design of Power Electronic Devices and Modules

N. Delmonte[1], M. Bernardoni[1], P. Cova[1], and R. Menozzi[1]
[1]Dipartimento di Ingegneria dell’Informazione, University of Parma, Parma, Italy

This work describes a way to apply 3D Finite Element Analysis (FEA) to the thermal design of power electronic modules using simplified geometry models of the system components. The method here presented can overcome the problem of solving equation systems with a very high number of ... Mehr lesen

Simulation of the Convective Heat Transfer and Working Temperature Field of a Photovoltaic Module Using COMSOL Multiphysics®

E. Ruiz-Reina[1] and M. Sidrach-de-Cardona[1]
[1]Departamento de Física Aplicada II, Universidad de Málaga, Málaga, Spain

The aim of this work is the Finite Element Analysis (FEA), by  using COMSOL Multiphysics®, of the convective heat transfer and working temperature field of a photovoltaic module under different wind conditions. Mehr lesen

Optimization of Dynamic Embedded, Water Based Surface Heat (and Cold) Emitting System for Buildings

S. Thomas[1], P.Y. Franck[1], and P. André[1]
[1]Department of Sciences and Environmental Management, University of Liège, Arlon, Belgium

This paper presents the heat flow model and the experimental test bench developed to optimize a new kind of heating floor. In the first part of the text is described the new kind of high reactivity emitting device for building heating and cooling. The second part illustrates the ... Mehr lesen

Modelling of the Hydrogen Diffusion in Martensitic Steel in Contact with H2SO4 Media

J. Bouhattate[1], X. Feaugas[1], and S. Frappart[1][2]
[1]Laboratoire d’Etudes des Matériaux en Milieux Agressifs,
Université de La Rochelle, La Rochelle, France
[2]V&M France, CEV, Aulnoye-Aymeries, France

Hydrogen Embrittlement (HE) is one of the mechanisms responsible for premature failure of structures. In the context of environmental sustainability, it is compelling to improve or conceive new processes and/or new materials capable of reducing fracture induced by HE. We analyzed the ... Mehr lesen

Classical Models of the Interface Between an Electrode and an Electrolyte

E. Gongadze[1], S. Petersen[1], U. Beck[2], and U. van Rienen[1]
[1]Institute of General Electrical Engineering, University of Rostock, Rostock, Germany
[2]Institute of Electronic Appliances and Circuits, University of Rostock,
Rostock, Germany

The Electrical Double Layer (EDL) plays a major role in understanding the interface between a charged surface (e.g. an implant) and ionic liquids (e.g. body fluids). The three classical models of the EDL (Helmholtz, Gouy, and Chapman-Stern) are numerically solved for a flat surface ... Mehr lesen

COMSOL Multiphysics® as a General Platform for the Simulation of Complex Electrochemical Systems

A. Lavacchi[1]
[1]Department of Chemistry, University of Firenze, Sesto Fiorentino, FI, Italy

Microelectrodes demonstrate that modeling is crucial for understanding the behavior of complex electrochemical systems. The use of the finite element methods in electrochemistry may be of much more general interest for its ability to handle complex geometries. In this context a ... Mehr lesen

Current Density Simulations in the Electrodeposition from Ionic Liquids: Effects of the Conductivity

I. Perissi[1], C. Borri[1], S. Caporali[1], and A. Lavacchi[1]
[1]Department of Chemistry, University of Firenze, Sesto Fiorentino, FI, Italy

The overall goal of this work is the use of COMSOL Multiphysics® in the modeling of the current density distributions for the electrodeposition of aluminum coatings from ionic liquids. The local current distribution is strongly dependant on the conductivity and on the geometry of the ... Mehr lesen

An Agglomerate Model for the Rationalisation of MCFC Cathode Degradation

B. Bozzini[1], S. Maci[1], I. Sgura[2], R. Lo Presti[3], and E. Simonetti[3]
[1]Dipartimento di Ingegneria dell’Innovazione, Università del Salento, Lecce, Italy
[2]Dipartimento di Matematica, Università del Salento, Lecce, Italy
[3]ENEA Casaccia, Dipartimento TER, Centro Ricerche Casaccia, S. Maria di Galeria, Roma, Italy

This paper describes the numerical modeling of a key material-stability issue within the realm of Molten Carbonate Fuel Cells (MCFC). The model describes the morphological and attending electrocatalytic evolution of porous NiO electrodes and is apt to predict electrochemical observables ... Mehr lesen

Large Scale 3D Flow Distribution Analysis in HTPEM Fuel Cells

C. Siegel[1][2], G. Bandlamudi[1][2], N. van der Schoot[1], and A. Heinzel[1][2]
[1]Zentrum für BrennstoffzellenTechnik GmbH, Duisburg, Germany
[2]Institut für Energie- und Umweltverfahrenstechnik, University of Duisburg-Essen, Duisburg, Germany

Accurate bipolar-plate and flow-field layout is one crucial task for optimizing fuel cells. These cell components perform several functions, including charge transport or gas and water transport throughout the cell just to name a few. Overall, the design depends on the fuel cell ... Mehr lesen

Erste
Vorherige
1–10 of 209