COMSOL Conference 2025 Proceedings
Vom Program Committee akzeptierte Sammlung von Beiträgen, Postern und Präsentationen
Auf der COMSOL Conference 2025 stellten Ingenieure, Forscher und Wissenschaftler aus aller Welt ihre Nutzung von Modellierung und Simulation in allen wichtigen Branchen und im akademischen Bereich vor. Verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach Thema oder Veranstaltungsort. ISBN: 978-1-7364524-3-1
This study deals with the 3D modeling of a light photocatalytic textile. This process aims to decontaminate industrial effluents such as water with pesticides. The present study describes the implementation of a reactive transport model in a computational fluid dynamics model developed ... Mehr lesen
This article is the result of a hobby project. The article is going thru the iterative developing process of a claw pole machine. In this developing process, simulating the magnetic flux density and back EMF waveform have been used to validate geometrical changes to the machine. Mehr lesen
Adsorption heat exchangers (AdHXs) are important components in adsorption heat pumps and chillers, a primary energy efficient source of heating and cooling. Due to availability and established inexpensive manufacturing fin-and-tube type heat exchangers with beds of adsorption pellets in ... Mehr lesen
Electromagnetic actuators are representing one important component of ABB's medium voltage reclosers [1, 2]. Their performance is strongly influenced by the considered material properties as well as by the electronic control units that will power the actuator. Depending on the studied ... Mehr lesen
A recurring problem, in heat assisted magnetic recording is the build-up of thermal energy in the near-field transducer leading to NFT deformation and the cessation of operation. A mechanism to dissipate this excess heat in the NFT without greatly effecting its’ plasmonic response is ... Mehr lesen
Electropolishing is an electrochemical process that radiofrequency accelerating cavities undergo in order to improve their inner metal surface finishing. This is performed prior to their installation into particle accelerators, in order to enhance their accelerating properties. Using ... Mehr lesen
A mathematical model is developed for the stripping of CO2 from rich solvent. The rich solvent (aqueous NaOH) is used in CO2 absorption from natural gas through gas-liquid hollow fiber membrane contactor. The polyvinylidene fluoride (PVDF) hollow fiber membrane was fabricated via ... Mehr lesen
The authors are currently investigating the use of bulk high temperature superconductors as trapped field magnets (TFMs) in order to increase the electrical and magnetic loading of an axial gap, trapped flux-type superconducting electric machine. In electric machines, the use of ... Mehr lesen
ELENA is a small cooler decelerator ring at CERN which will be built to increase substantially the number of usable antiprotons delivered to experiments for studies with antihydrogen and antiprotonic nuclei. COMSOL Multiphysics® software has been used to completely model the ELENA ... Mehr lesen
Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA) are commonly used for separation/purification of gas mixtures in industrial processes. The cycle time of industrial TSA processes usually ranges from several hours to days. The reason for this long cycle time is the ... Mehr lesen
