Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Auf der COMSOL Conference 2026 stellten Ingenieure, Forscher und Wissenschaftler aus aller Welt ihre Nutzung von Modellierung und Simulation in allen wichtigen Branchen und im akademischen Bereich vor. Verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach Thema oder Veranstaltungsort.

Suchbegriff:

2016 - All

Model of Pressure Drop Separation during Aqueous Polymer Flow in Porous Media

D. C. Raharja [1], R. E. Hincapie [1], M. Be [1], C. L. Gaol [1], L. Ganzer [1],
[1] Clausthal University of Technology, Clausthal-Zellerfeld, Germany

Aqueous polymers used for enhanced oil recovery (EOR) application is considered a complex fluid. It can exhibit Newtonian and Non-Newtonian behavior depending on the velocity or the stresses that it is submitted during the flooding process. Therefore, the polymer flooding project ... Mehr lesen

Optimal Installation Configuration of Thermoelectric Generators

Y. Kaymak [1], F. Mintus [1],
[1] VDEh-Betriebsforschungsinstitut GmbH, Düsseldorf, Germany

This paper presents a multiphysics model to the convective, conductive and radiative heat transfer for the thermoelectric modules (TEMs), which are used to convert heat flux into electrical current. The model basically consists of heat transfer in solids, heat transfer in thin shells, ... Mehr lesen

Simulation of an Immunodetection System Based on Magnetic Nanoparticles

A. Rabehi [1], H. Kokabi [1], L. Chen [2], K. A. Ngo [3], H.-J. Krause [2]
[1] Sorbonne Universités, Laboratoire d’Electronique et Electromagnétisme, Paris, France
[2] Peter Grünberg Institute, Bioelectronics, Forschungszentrum Jülich, Germany
[3] Sorbonne Universités, Laboratoire Interfaces et Systemes Electrochimiques (LISE), Paris, France

In a first approach towards application of the magnetic frequency mixing technique to microfluidic structures, microplanar coils have to be designed along with sample reservoir. For this, a COMSOL Multiphysics® electrical model along with an analytical calculation is used in order to ... Mehr lesen

Thermal Characterization of Low-Melting-Temperature Phase Change Materials (PCM)

L. Salvador [1], J. Hastanin [1], F. Novello [2],
[1] Centre Spatial de Liège (CSL), Angleur, Belgium
[2] CRM Group, Liège, Belgium

The successful implementation of a high-efficient latent heat storage system necessitates an appropriate experimental approach to investigate and quantify the variations of the Phase Change Material (PCM) thermal properties caused by its aging, as well as its potential demixing induced ... Mehr lesen

Modeling Orbital Angular Momentum (OAM) Transmission in Waveguides with the COMSOL Multiphysics® Software

A. Cagliero [1], R. Gaffoglio [1], A. De Vita [2], B. Sacco [2],
[1] Department of Physics, University of Torino, Torino, Italy
[2] Centre for Research and Technological Innovation, RAI Radiotelevisione Italiana, Torino, Italy

The recent years have witnessed a growing interest in the possibility of enhancing the information transfer per unit bandwidth by exploiting the Orbital Angular Momentum (OAM) of light in both free-space and guided scenarios. In the proposed paper, the propagation of suitable OAM ... Mehr lesen

Optoelectronic Transducer with an Optical Fiber Transmission Used for Current Measurement

J. Golebiowski [1],
[1] Dept. of Semiconductor and Optoelectronics Devices, Lodz University of Technology, Lodz, Poland

The transducer's construction used for current measurement in medium voltage power lines for current values kA is shown. The transducer involves magnetic circuit with a gap in which a MEMS structure with a movable cantilever is placed. The beam is made of silicon with a NiFe layer. The ... Mehr lesen

Numerical Vibration Analysis of Impacted CFRP Specimens Using COMSOL Multiphysics® Software

P. Jatzlau [1], F. Seybold [1], C. Grosse [1],
[1] Technical University of Munich, Chair of Non-destructive Testing, Munich, Germany

The vibration behavior of carbon fiber reinforced composites (CFRP) specimens with impact damage is presented in order to evaluate if an before/after modal analysis can be used as a non-destructive testing method to detect delaminations. The impact damage is modeled by decreasing the ... Mehr lesen

3D-FEM Simulation of a Transverse Flux Machine Respecting Nonlinear and Anisotropic Materials

S. Müller [1], M. Keller [1], A. Echle [1], A. Enssle [1], P. Präg [1], A. Lusiewicz [1], D. Maier [1], N. Parspour [1],
[1] Institute of Eletrical Energy Conversion, University of Stuttgart, Stuttgart, Germany

The paper presents the three dimensional (3D) Finite Element Method (FEM) COMSOL Multiphysics® model of a Three Phase Permanent Magnetic Excited Transverse Flux Machine (TFM). The model is fully parameterized and able to sweep over all parameters during design optimization process. The ... Mehr lesen

Erste

381–388 of 426

Letzte

Veröffentlichungen und Präsentationen

Schnellsuche

COMSOL Conference 2025 Proceedings

Vom Program Committee akzeptierte Sammlung von Beiträgen, Postern und Präsentationen