Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
Accurate, real-time measurement of arterial oxygen partial pressure (PaO₂) is essential for managing respiratory diseases and critical care conditions. Traditional arterial blood sampling for PaO₂ is invasive, painful, and provides intermittent snapshots rather than continuous ... Mehr lesen
INTRODUCTION: The paper illustrates the use of COMSOL for obtaining the solution Ψ(x,y,t) as a solution to the time dependent nonlinear Schrödinger equation (NLSE). COMSOL previously was used to solve the time dependent NLSE in Ref.[1] as applied to quantum mechanics, however this is the ... Mehr lesen
Microplastic contamination in sediment samples presents analytical challenges, as microplastic concentrations typically remain below 1% in environmental matrices [1]. Current analytical workflows require cost-effective and rapid pre-separation methods to concentrate microplastic ... Mehr lesen
Axial-flux permanent-magnet motors are an important technology in many technical applications, being an alternative to radial-flux motors. Axial-flux motors come up with many advantages in comparison to radial-flux motors such as high-power density, higher torque to weight ratio etc. ... Mehr lesen
Impedance spectroscopy is an established sensing methodology used in microfluidic flow cytometry systems to electrically measure cell characteristics. The fluid transport method used in most flow cytometers is continuous flow driven by external syringe or pressure regulated pumps. An on ... Mehr lesen
Increased traffic and load on railway infrastructure require regular inspection of track components. Railway track elements such as fasteners, insulation joints, and weld joints are subjected to extreme loading conditions, making their regular inspection essential for ensuring the safety ... Mehr lesen
During the last three decades, lithium-ion batteries have become the choice of power source for most portable electronic devices. During a discharge process, intercalated lithium, which is initially stored in the anode, de-intercalates, diffuses out in the electrolyte, reaches the ... Mehr lesen
We present a problem-adapted finite element model, which enables the design of a novel type of a highly miniaturized, electrostatic MEMS membrane pump, as well as the investigation and the optimization of its operation. The electro-mechanical actuation scheme constitutes a strongly ... Mehr lesen
The current and energy transfer to cathodes of vacuum arcs usually occurs in bright, narrow regions, known as cathode spots. Owing to extreme conditions in these spots, the cathode surface is eroded: electrode material is vaporized, and craters and molten metal jets are formed. The study ... Mehr lesen
This case study explains the work we undertook where we modelled an Induction heating system in COMSOL Multiphysics simulation software to correlate the simulation results with actual measurements. The simulated results were cross checked with several different measurement scenarios, ... Mehr lesen