Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Alle

Boston 2024

Suchbegriff:

velocity field

Development of Micro/Nano Machines using COMSOL Multiphysics®

Shoji MARUO[1]

[1]Yokohama National University, Yokohama, Kanagawa, Japan

We have developed micro/nano machines such as optically driven micro/nano pumps and spiral-shaped piezoelectric vibration energy harvesters. COMSOL Multiphysics has been used for the design and development of the micro/nano machines. For example, optical force affected to a metallic ... Mehr lesen

Simulation of Constant-Volume Droplet Generators for Parallelization Purposes

D. Conchouso [1], A. Arevalo [1], D. Castro [1], Y. Ying [1], I. G. Foulds [2]
[1] King Abdullah University of Science and Technology, Thuwal, Makkah, Saudi Arabia
[2] School of Engineering, University of British Columbia - Okanagan, Vancouver, BC, Canada

To maintain same droplet size across parallel devices, new break-up strategies based on geometry are been studied. In this work, we model a geometrically-set droplet generator, in which the droplet break-up occurs by a block and break mechanism. In other words when the disperse phase ... Mehr lesen

Using a Level-Set Model to Estimate Dwell Time in a Vacuum Dewatering Process for Paper

K. Rezk[1]
[1]Department of Energy, Environmental and Building Technology, Karlstad University, Kronoparken, Sweden

Water removal during paper manufacturing is an intensive energy process. The dewatering process generally consists of four stages in which the first three stages, water is removed mechanically through vacuum pulses and pressing.The fourth stage involve thermal drying. The vacuum ... Mehr lesen

Heat Loss Evaluation of an Experimental Set-up for Predicting the Initial Stage of the Boiling Curve for Water at low Pressure

K. T. Witte[1], F. Dammel[2], L. Schnabel[1], and P. Stephan[2]
[1]Fraunhofer Institut Solare Energiesysteme - Department of Thermal Systems and Buildings, Freiburg, Germany
[2]Technische Universität Darmstadt - Institute of Technical Thermodynamics, Darmstadt, Germany

In this paper heat losses and gains are assessed for a specific measuring set-up improving the validity of performance data to accurately predict the initial stage of a boiling curve. Simulation focus on achieving results predicting real measuring data of a plain surface structure. ... Mehr lesen

Modeling the Behavior of a Polymer Electrolyte Membrane within a Fuel Cell Using COMSOL

S. Beharry[1]
[1]University of the West Indies, St. Augustine, Trinidad and Tobago

One viable alternative to non-renewable fossil fuels is the fuel cell. A special class of FC i.e. Proton Exchange Membrane Fuel Cell (PEMFC) has been investigated during the present study. Membrane is a very important part of a PEMFC as most ohmic losses occurs here and limits the ... Mehr lesen

Study of Two-Phase Microslug Formation in a Microchannel Cross Junction

M.R. McDevitt, D.L. Hitt, and J.W. McCabe
University of Vermont, Burlington, VT, USA

NASA and the Department of Defense have interest in the development of satellites which are several orders of magnitude smaller than those currently in use. These ‘nanosats’ will require new propulsion systems to offer precise thrust and impulse-bit characteristics on the order of 10 ... Mehr lesen

Coupling Forced Convection in Air Gaps with Heat and Moisture Transfer inside Constructions

M. Bianchi Janetti[1], F. Ochs[1]
[1]University of Innsbruck, Innsbruck, Austria

Introduction: The simulation of coupled heat and moisture transfer in constructions is becoming even more important in the last years. COMSOL Multiphysics represents a powerful tool for this kind of simulations as shown in [1,2,3], although applications in this area are still rare. For ... Mehr lesen

Using COMSOL for the Transport Modelling of Some Special Cases in a Bentonite Buffer in a Final Repository for Spent Nuclear Fuel

M. Olin[1], V-M. Pulkkanen[1], A. Seppälä[1], T. Saario[1], A. Itälä[1], M. Tanhua-Tyrkkö[1], and M. Liukkonen[1]

[1]VTT, Technical Research Centre of Finland, Espoo, Finland

The bentonite barrier is an essential part of a safe spent fuel repository in granitic bedrock. In this work COMSOL Multiphysics® is used in modelling the Thermal (T), Hydrological (H), Mechanical (M) and Chemical (C) phenomena and processes taking place in a bentonite buffer. Special ... Mehr lesen

Inclusive Routine of the Soil Surface Energy Balance in COMSOL Multiphysics®

M. Bortoloni[1], M. Bottarelli[2], Y. Su[3]
[1]Department of Engineering, University of Ferrara, Este, Italy
[2]Department of Architecture, University of Ferrara, Este, Italy
[3]Faculty of Engineering, University of Nottingham, Nottingham, UK

In ground-coupled heat pumps (GCHPs) the coupling between heat pumps and ground occurs by means of ground heat exchangers, that can be installed vertically inside boreholes (BHEs) or horizontally (HGHEs). In the horizontal installation, the heat exchangers are placed in shallow trenches ... Mehr lesen

Complete Modeling of a Vented Box Loudspeaker in COMSOL Multiphysics®

R. Vaucher[1]
[1]NEXO, Plailly, France

This paper describes the use of COMSOL Multiphysics® during the design of a vented box loudspeaker. Templates have been created to model the different needs of a complete design. Based upon those templates a box has been prototyped, measured and confronted to simulation. The cabinet may ... Mehr lesen

Erste

1211–1220 of 1355

Letzte