Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.


Sehen Sie sich die Kollektion für die COMSOL Conference 2023 an

A Flow and Transport Model in Porous Media for Microbial Enhanced Oil Recovery Studies Using COMSOL Multiphysics® Software

M. A. Diaz-Viera [1], A. Ortiz-Tapia [1],
[1] Mexican Petroleum Institute, Mexico City, Mexico

A flow and transport model in porous media was implemented in COMSOL Multiphysics® software to simulate, analyze and interpret Microbial Enhanced Oil Recovery (MEOR) processes at core scale under laboratory conditions. The flow model is biphasic and is based on the oil phase pressure ... Mehr lesen

Uncertainty of FEM Solutions Using a Nonlinear Least Squares and Design of Experiments Approach

J. T. Fong [1], N. A. Heckert [1], J. J. Filliben [1], P. V. Marcal [2], R. Rainsberger [3]
[1] National Institute of Standards and Technology, Gaithersburg, MD, USA
[2] MPACT Corp., Oak Park, CA, USA
[3] XYZ Scientific Applications, Inc., Livermore, CA, USA

Uncertainty in COMSOL Multiphysics® software simulations due to (a) model parameter uncertainties and (b) mesh-induced truncation errors, is estimated using a design-of-experiments approach [1, 2, 3], and a nonlinear least squares logistics fit method [4, 5], respectively. Examples to ... Mehr lesen

COMSOL Multiphysics® Software and PV: A Unified Platform for Numerical Simulation of Solar Cells and Modules

M. Nardone [1],
[1] Bowling Green State University, Bowling Green, OH, USA

Introduction: Existing solar cell (photovoltaic, PV) device simulation software is either open source with limited capabilities (1D only) [1,2] or extremely expensive with obscure functionality [3]. PV researchers need an accessible and versatile simulation tool to optimize existing ... Mehr lesen

Demonstration of Polymer Microring Resonator for Optical Biosensor using COMSOL

Mohd Haziq M.S.[1]
Mohd Hazimimin Mohd Salleh[2]

[1]Department of Information Systems, Kulliyyah of Information and Communication Technology, International Islamic University Malaysia, Kuala Lumpur, Malaysia

[2]Department of Physics, Kulliyyah of Science, International Islamic University Malaysia, Pahang, Malaysia

In this paper, we use a COMSOL Multiphysics® model to demonstrate the potential use of polymer microring resonator structures for optical biosensing applications. When the refractive index of the area surrounding the microring resonator changes, there is a shift in the resonance ... Mehr lesen

Optoelectronic Simulation of An Organic Bulk Heterojunction Solar Cell with COMSOL

Koh Wee Sing[1]
[1]Institute of High Performance Computing, Agency for Science, Technology, and Research, Singapore, Singapore

In this project, we developed a 3D optoelectronic model for organic bulk-heterojunction solar cells. We validated our COMSOL Multiphysics® model with experimental data and used our simulation to predict the optical and electrical characteristics of a 3D plasmonic OPV device. This work ... Mehr lesen

Rheological Behaviour of Single–Phase Non-Newtonian Polymer Solution in Complex Pore Geometry: A Simulation Approach

P. Idahosa[1], G. Oluyemi[2], R. Prabhu[2], B. Oyeneyin[2]
[1]IDEAS Research Institute/School of Engineering, Robert Gordon University, Aberdeen, United Kingdom.
[2]School of Engineering, Robert Gordon University, Aberdeen, United Kingdom.

One of the most important criteria for evaluating chemical enhanced oil recovery (EOR) processes that use polymers is its rheological behaviour which in turn account for other physical effects of adsorption and resistance factors during polymer-rock interactions. However, complete ... Mehr lesen

Analysis of Flow in a Microfluidic Device: Pressure Drop, RTD and Mixing

A. Kulkarni[1]
[1]NCL, Pune, Maharashtra, India

Continuous flow reactors are recently being used for lab scale synthesis as well as pilot scale manufacturing of high value low volume chemicals. Here we present our work on a new configuration of flow reactor that includes several 1800 bends and yet a varying radius of curvature thereby ... Mehr lesen

Modeling of Rotating Magnetic Field Eddy Current Probe for Inspection of Tubular Metallic Components

T. V. Shyam[1], B. S. V. G. Sharma[1], K. Madhusoodanan[1]
[1]Bhabha Atomic Research Centre, Mumbai, Maharashtra, India

Rotating Magnetic Field Eddy current technique is a promising technique for inspection of flaws in metallic tubular components. Three primary coils, 120 degrees apart in space, are excited with three phase current source, by virtue, a rotating magnetic field polarised ... Mehr lesen

Analysis of a Planar Inverted-F Mobile Handset Antenna with Reduced Radiation Towards the Human Head

C. Anandan[1]
[1]Cochin University of Science and Technology, Cochin, Kerala, India

This paper deals with the simulation and analysis of SAR and temperature distribution induced by a Planar Inverted-F Antenna on human head model using COMSOL Multiphysics® software. The goal of this paper is to compare the SAR and temperature distributions of omni-directional PIFA with ... Mehr lesen

Vibration Analysis of Rectangular Perforated Plates by COMSOL Multiphysics® Software

B. Raghavendra[1]
[1]SRM University & BITS Pilani University, Chennai, Tamil Nadu, India

Vibration analysis of perforated plates is extremely important when designing structures where resonance is the possible mode of failure. This paper deals with the vibration analysis of rectangular perforated plates with three different types of perforations. Vibration analysis is to be ... Mehr lesen