Sehen Sie, wie die Multiphysik-Simulation weltweit in der Forschung eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Sammlung für die COMSOL Conference 2026 an
Numerical simulation can be advantageously employed to predict the main cell features (e.g., the reaction rate distribution on the electrodes, the cell voltage, or the electrolyte temperature) in order to optimize the design and operational conditions of the process. In this poster, we ... Mehr lesen
The reduction of energy consumption in the building sector (nearly 40% of the energy consumption in Europe) is a real challenge to achieve the objective of the “2020 European climate and energy package”. In recent years, great interest is observed for the Stirling thermoacoustic ... Mehr lesen
The control of the hydration during the thermal process of dates is crucial in order to save energy and to obtain a good quality for the final product. In this work, a theoretical model was developed in COMSOL Multiphysics software to describe the mass transfer phenomena involved in this ... Mehr lesen
Many of fibrous materials are very good sound absorbers, because the acoustic waves, which propagate in air and penetrate a fibrous layer, interact with the fibers so that the wave energy is dissipated. The dissipation is related to some viscous and thermal effects occurring on the micro ... Mehr lesen
This publication aims to investigate conjugate heat and mass transfer around a clothed virtual manikin. This research can be performed at different scales: (1) at material scale where a piece of textile is investigated in 1D or 2D space or (2) at system level where a clothed cylindrical ... Mehr lesen
For our simulation we used the Piezoelectric Devices interface. The structure was set with (clamped) fix constraint boundaries to both ends. The bottom electrode was set to be the ground for the electrostatic physics and the top electrode was set to be a Terminal with potential of 10V. A ... Mehr lesen
Electroacoustic resonators employing surface acoustic waves (SAW) are commercially widely used in RF filters, low noise frequency sources as well as various sensors. In all of these applications the resonance quality factor appears to be a limiting performance factor. Quite often ... Mehr lesen
A 1D-axisymmetric model was built to represent the drying of a single d’Ente plum to d’Agen prune. Underlying assumptions of the model were those of Di Matteo et al. 2003. Sorption isotherms of plum come from Tsami et al, 1990 and equation structure of apparent water diffusion ... Mehr lesen
