Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
We modify a Tunnel Effect Microscope (STM) with the purpose of analyzing the local production of photons in the electrostatic junction during the image taking process. The novelty of this project compared to previous studies is that it is intended to be developed from the beginning as ... Mehr lesen
The Huygens Atmospheric Structure Instrument (HASI) was designed to characterize the physical properties of the lower atmosphere and surface of Titan, the planet-size moon of Saturn. The Relaxation Probe (RP) sensor on the Huygens probe, determined the electrical conductivity in the ... Mehr lesen
Scanning electrochemical microscopy (SECM) is a powerful tool recently developed for studying structures and processes in micrometer and submicrometer sized systems. It can probe electron, ion, and molecule transfers, and other reactions at solid-liquid, and liquid-liquid, interfaces . ... Mehr lesen
The fabrication of piezo aluminium composite modules for sensor and actor applications with mass production technologies is in the scope of the SFB/Transregio 39 PT-PIESA project funded by the (German Research Foundation). After forming of cavities with a width of 0.3 mm into aluminium ... Mehr lesen
The detection of early corrosion is a key issue to mitigate the damage induced by metal corrosion. The optical fiber corrosion sensor based on a side-polished polarizer is realized recently. The polarizer is fabricated by sputtering a Fe film on a side-polished single mode fiber. The new ... Mehr lesen
Interest in the production of hydrogen from hydrocarbons has grown significantly recently. In order to achieve high surface to volume ratio with reasonable pressure drop, monolithic reactors are used. The goal of this work is to develop a two-phase (gas & solid) transient catalytic ... Mehr lesen
Strain gauges have been extensively used for detecting strain in various applications. Double-ended tuning fork (DETF) strain gages present better performance characteristics than standard foil gauges, including higher sensitivity, smaller size and higher resolution. This study focuses ... Mehr lesen
Silicon solar cells are produced in a series of different process steps in which wet-chemical etching and rinsing steps have a considerable influence on the quality of the wafers. Etching baths are used for surface structuring or intended etch back. Examples therefore are texturing, ... Mehr lesen
The constitutive properties of a paperboard side-notched composite loaded vertically were determined in inverse method (IM) using a single component of measured displacement data. The cost function, which is the difference between the measured v-displacement and the reconstructed ... Mehr lesen
A growing demand is recently emerging of sensors to be integrated in the concrete in order to measure some critical parameters, such as humidity and temperature and the internal pressure of the material. For example, by monitoring the pressure in various strategic points of the structure ... Mehr lesen