Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird

Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Suchbegriff:

Modelling Heat and Mass Transfer in Microreactor for Methanol to Hydrocarbons

P. A. Delou [1,3], V. Degirmenci [2,3],
[1] Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil
[2] University of Warwick, Coventry, United Kingdom
[3] Queen’s University Belfast, Belfast, United Kingdom

Recently, increasing availability of natural gas, due to the shale gas, raises the attention to the conversion of methane. Methanol-to-Hydrocarbons reaction (MTH) plays an important role in this route where methanol synthesized through syngas is converted into hydrocarbons, such as ... Mehr lesen

Fracture-Matrix Flow Partitioning and Cross Flow: Numerical Modeling of Laboratory Fractured Core Flood

R. Sanaee[1], G.F. Oluyemi[1], M. Hossain[1], B.M. Oyeneyin[1]
[1]Robert Gordon University, Aberdeen, United Kingdom

The contrast between hydro-mechanical behavior of the rock matrix and fracture network systems results in flow partitioning between fracture and matrix systems which is affected by the In-situ stress regime. Fracture flow, Darcy law and free and porous media flow physics interfaces of ... Mehr lesen

Equation Based Heat and Mass Transfer in Porous Media

S. Pemberton[1], K. Ekici[1], R. Arimilli[1]
[1]The University of Tennessee, Knoxville, TN, USA

Perspiration during intense physical activity is an essential part of human thermoregulation. Clothing affects the cooling rate of the body. Heat and water vapor are coupled through evaporation and transported through the fabric. A model of the above system was developed for fabrics of ... Mehr lesen

Seeding Distribution in the Channel of a Cell Culture Vessel

J. Brcka [1], K. Kagawa [2], S. Ozaki [2], Y. Oshima [3], G. Zhang [4],
[1] Tokyo Electron U.S. Holdings, Inc., Austin, TX, USA
[2] Tokyo Electron, Technology Development Center, Chuo-ku, Kobe, Japan
[3] Tokyo Electron Europe LTD, Stem Cell Technology Centre, Stevenage, United Kingdom
[4] Clemson University, Rhodes Engineering Research Center, Clemson, SC, USA

Conventional cell culture (CC) techniques are advancing significantly with a trend towards a mass production. While plating density (number of cells per volume of culture medium) plays a critical role for some cell types, the initial distribution of these cells is affected by the actual ... Mehr lesen

Modeling of Directional Dependence in Nanowire Flow Sensor

A. Piyadasa[1,3], P. Gao[1,2,3]
[1]Department of Physics, University of Connecticut, Storrs, CT, USA
[2]Department of Materials Science & Engineering, University of Connecticut, Storrs, CT, USA
[3]Institute of Materials Sciences, University of Connecticut, Storrs, CT, USA

3D finite element analysis model has been constructed for testing the directional dependence in a novel form of nanowire array gas flow sensor. Single nanowire (p-type single crystal Silicon) model is developed using fluid structure interaction and piezoresistivity components in the MEMS ... Mehr lesen

Numerical Modeling of a Microtubular Solid Oxide Fuel Cell Using COMSOL Multiphysics®

P. Pianko-Oprych[1], E. Kasilova[1], Z. Jaworski[1]
[1]West Pomeranian University of Technology, Faculty of Chemical Technology and Engineering, Szczecin, Poland

Micro-tubular Solid Oxide Fuel Cells (mSOFC) are attracting more and more interest as new generation of energy conversion devices. Although commercial applications still suffer from high costs, there is a need for further improvement of the cell performance, durability and start-up. To ... Mehr lesen

Improvements in the Modeling of the Self-ignition of Tetrafluoroethylene

M. Beckmann-Kluge, F. Ferrero, V. Schröder, A. Acikalin, and J. Steinbach
Federal Institute for Materials Research and Testing, Technical University, Berlin, Germany

Tetrafluoroethylene (TFE) is a gas widely employed in industry, which can under specific circumstances experience an exothermic dimerization to octafluorocyclobutane. If the heat generated by this reaction cannot be dissipated to the surroundings, the temperature inside the reactor will ... Mehr lesen

Biosimulation of Normal Pressure Hydrocephalus Using COMSOL Multiphysics^®

K. Shahim[1], J-M. Drezet[1], J-F. Molinari[2], S. Momjian[3], and R. Sinkus[4]

[1]LSMX, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[2]LSMS, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[3]University Hospitals of Geneva and University of Geneva, Switzerland
[4]Waves and Acoustics Laboratory, ESPCI, Paris, France

A numerical finite element model of one human brain is built in COMSOL in order to study a particular form of hydrocephalus, the so called Normal Pressure Hydrocephalus (NPH). The geometry of the ventricles and the skull is obtained by Magnetic Resonance Imaging (MRI) and imported in ... Mehr lesen

Fluid-Structure Interaction of a Double Curvature Arch Dam Under Seismic Loading by the Application of Added Mass Technique and Acoustic Elements

R. Manikandan[1], P. Sultana[1]
[1]National Institute of Technology Silchar, Silchar, Assam, India

Fluid Structure Interaction (FSI) plays an important role in the seismic analysis and the design of Hydraulic structures. In this study, the acoustic finite element model is analyzed with impounded water considering appropriate boundary conditions between the water & the upstream ... Mehr lesen

Finite Element Modeling of the Stress Field in a Cell-Seeded Microchannel

G. Zhu, and Y. Li
Lawrence Technological University, Southfield, MI, USA

Fluids used in biomedical microelectromechanical systems (BioMEMS) devices often exhibit very different flow behavior from those in bulk solutions, which in turn affects the behavior of cells and biomolecules in the device. In this work, we investigate an integrated microfluidic system ... Mehr lesen

Erste

401–410 of 543

Letzte