Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
Multiphase flow in a microreactor was studied numerically for two immiscible liquids. Validation of the model was sought by simulating the flow behavior and mass transfer characteristics of a neutralization reaction described in the literature. Contact angles, interfacial tension and the ... Mehr lesen
An increased share of renewable energies is regarded as an integral part of a strategy towards a sustainable future. With regard to the heat supply sector this may be achieved using solar thermal collectors or heat pump systems with borehole heat exchangers. During the last years solar ... Mehr lesen
Submerged membrane bioreactor (SMBR) is an efficient technology for wastewater treatment that combines biological process and membrane filtration in one single stage. In the most usual configuration, submerged membrane hollow fibers are set in several planes. Air is introduced from the ... Mehr lesen
In this paper, we present an interesting method to microfabricate a tilted micro air jet generator. We used the well-know Deep Reactive Ion Etching (DRIE) technique in order to realize in a silicon substrate a double side etching. For aircraft and cars, micro air jets will take an ... Mehr lesen
Museum buildings strive for a stable indoor climate to reduce the risk of cultural object degradation. An incorrect temperature or relative humidity can induce or accelerate deterioration processes such as biological, chemical or mechanical degradation. In order to reduce these risks, ... Mehr lesen
In a nuclear reactor, the containment is the last barrier for the release of radioactivity during severe accident conditions. Containment material can be concrete or steel or steel-lined concrete. Steel containments have a high load bearing capacity and a high degree of leak tightness at ... Mehr lesen
A model was developed to simulate the reaction, concentration field, flow field, and temperature distribution inside a Claus reactor for converting hydrogen sulfide to sulfur. The model considered two ideal reactors, a continuous stirred tank reactor and a plug flow reactor. As expected, ... Mehr lesen
The quality of coatings obtained by means of thermal spraying depends strongly on the mechanism of the interaction between the molten droplets and the surface to be covered. The aim of the present study is to simulate the impact of a droplet onto a substrate, in order to have a good ... Mehr lesen
A micro Planar Ion Mobility Spectrometer (P-FAIMS) has been simulated using multiphysics software. In P-FAIMS target ions are discriminated by the application of the proper separation voltages to the electrodes of the system. Modelling of vapour phase ions of two compounds have been ... Mehr lesen
With offshore oil and gas exploration and production moving into ever deeper waters, the suspended length of marine risers (transporting hydrocarbons from the seabed to the surface) can easily exceed 3000 meters. One of the major design requirements for risers in (ultra) deep water is to ... Mehr lesen
