Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Alle

Boston 2024

Suchbegriff:

building

Numerical Study of the Controlled Droplet Breakup by Static Electric Fields inside a Microfluidic Flow-focusing Device

Y. Li[1], K. Nandakumar[1], M. Jain[1]
[1]Louisiana State Univeristy, Baton Rouge, LA, USA

Conventional passive microfluidic flow-focusing devices confront difficulties in controlling droplet sizes in dripping regime especially when the dispersed phase has a large viscosity. It is reported that external electric field can be used to manipulate the droplet breakup. In the ... Mehr lesen

Computational Modeling to Study the Treatment of Cardiac Arrhythmias using Radiofrequency Ablation

A. González-Suárez[1], M. Trujillo[2], J. Koruth[3], A. D'Avila[3], E. Berjano[1]
[1]Biomedical Synergy, Electronic Engineering Department,Universitat Politècnica de Valencia, Valencia, Spain
[2]Instituto Universitario de Matemática Pura y Aplicada, Universitat Politècnica de Valencia, Valencia, Spain
[3]Helmsley Cardiac Electrophysiology Center, Mt SinaiMedicalCenter and School of Medicine, New York, NY, USA

Previous studies proposed using bipolar radiofrequency ablation across two catheters placed on opposing surfaces of the ventricular wall to create transmural lesions. 2D and 3D models were built and solved with COMSOL Multiphysics software. With these models, it was possible to study the ... Mehr lesen

Long Term Performance Of Borehole Heat Exchanger Fields With Groundwater Movement

S. Lazzari, A. Priarone, and E. Zanchini
DIENCA, University of Bologna, Bologna, Italy

A numerical investigation of the long-term performance of double U-tube borehole heat exchanger (BHE) fields, in the case of non-negligible effects of groundwater movement, is performed by means of COMSOL Multiphysics. Two time periodic heat loads, with a period of one year, are studied: ... Mehr lesen

Numerical Study of Droplet Formation inside a Microfluidic Flow-Focusing Device

Y. Li[1], M. Jain[1], K. Nandakumar[1]
[1]Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA

The micro-nanometer sized droplets have tremendous applications in bio-diagnostics, polymerization processes etc. In this work, we numerically investigate the droplet formation process of silicone oil in aqueous solution in a MFF device. A conservative level-set method is adopted to ... Mehr lesen

Numerical Simulation of Electrolyte-Supported Planar Button Solid Oxide Fuel Cell

A. Aman[1], R. Gentile[1], Y. Chen[1], X. Huang[2], Y. Xu[1], N. Orlovskaya[1]
[1]Department of Mechanical, Materials and Aerospace Engineering, University of Central Florida, Orlando, FL, USA
[2]Department of Mechanical Engineering, University of South Carolina, Columbia, SC, USA

Solid oxide fuel cells (SOFCs) are electrochemical conversion devices that utilize ceramics as their electrolyte material for oxygen conduction. Compared to other types of fuel cells, they operate at relatively high temperatures, typically 400°C to 1000°C, and have an electrical ... Mehr lesen

Design and Optimization of a High Performance Ultrasound Imaging Probe Through FEM and KLM Model

L. Spicci, and M. Cati
Esaote SpA
Florence, Italy

The present paper describes the development of a full FEM model for linear array high performance 5MHz ultrasound imaging transducer. As a preliminary design, a mono dimensional electro-acoustical KLM model was realized, then the complete FEM was developed and optimized. The optimized ... Mehr lesen

From CT Scan to Plantar Pressure Map Distribution of a 3D Anatomic Human Foot

S. Gerbino, and P. Franciosa
University of Molise, School of Engineering, Via Duca degli Abruzzi, Termoli, Italy

Understanding the stress-strain behavior of human foot tissues and pressure map distributions at the plantar interface is of interest into biomechanical investigations. In particular, monitoring plantar pressure maps is crucial to establishing the perceived human comfort of shoe insoles. ... Mehr lesen

Coupled Heat and Mass Transfer Processes in Enclosed Environments

J.L.Wilson[1], and R. Dwivedi[1]

[1]New Mexico Institute of Mining and Technology, Socorro, New Mexico, USA

Geothermally driven natural convection in enclosures is a ubiquitous process occurring in many physical environments such as caves, mines, etc. We have numerically simulated laminar and turbulent natural convection in isolated air-filled cavities, buried in a more conductive rock mass. ... Mehr lesen

Optimization of the Gas Flow in a GEM Tracker with COMSOL and TENDIGEM Development

F. Noto[1,2], V. Bellini[1,2], E. Cisbani[3,4], V. De Smet[1,5], F. Librizzi[6], F. Mammoliti[1,2], and C. Sutera[6]
[1]Dipart. di Fisica ed Astronomia, Università di Catania, Catania, Italy
[2]INFN – Sezione di Catania, Catania, Italy
[3]IINFN – Sezione di Roma - Sanità Group, Roma, Italy
[4]Italian National Institute of Health, Roma, Italy
[5]Haute Ecole Paul-Henri Spaak, ISIB, Bruxelles, Belgium
[6]NFN - Sezione di Catania, Catania, Italy

The Gas Electron Multiplier (GEM) technology has been proven to tolerate rate larger than 50 MHz/cm2 without noticeable aging and to provide the sub millimeter resolution on working chambers up to 45x45 cm2. A new GEM based tracker is under development for the Hall A upgrade at ... Mehr lesen

Optimization of the Design of a GEM Tracker Based on Gas Flow Simulations with COMSOL

V. De Smet[1], V. Bellini[2], E. Cisbani[3], F. Noto[2], F. Mammoliti[2], C. M. Sutera[4], and M. Mangiameli[4]
[1]Dipartimento di Fisica ed Astronomia, Università di Catania, Catania, Italy; Haute Ecole Paul-Henri Spaak, ISIB, Bruxelles, Belgium
[2]Dipartimento di Fisica ed Astronomia, Università di Catania, Catania, Italy; INFN – Sezione di Catania, Catania, Italy
[3]INFN – Sezione di Roma - Sanità Group, Roma, Italy; Italian National Institute of Health, Roma, Italy
[4]INFN - Sezione di Catania, Catania, Italy

A Computational Fluid Dynamics study has been performed for a Gas Electron Multiplier (GEM) detector of high energy charged particles, currently under development as part of a new tracker of the high luminosity spectrometers in Hall A at Jefferson Lab. By gradual modifications of the ... Mehr lesen

Erste

611–620 of 626

Letzte