Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
The transient behavior of the thermal resistance of single and double U-tube borehole heat exchangers (BHEs) is investigated numerically by means of COMSOL Multiphysics® software with reference to the 2D cross section of usually employed BHEs. The study is performed in a dimensionless ... Mehr lesen
In this study the flow through a tube filled with highly porous aluminium foam of three different pore sizes is analysed using COMSOL Multiphysics® CFD Module and compared to experimentally determined pressure drop data. Analyzing the flow through an array of pores allow the deduction of ... Mehr lesen
This contribution is devoted to the mathematical modeling of the AC electroosmotic micropumps in COMSOL Multiphysics and Matlab. The mathematical model involves the microchannel surroundings and several AC-voltage driving modes. The weak form has been used for handling singularities and ... Mehr lesen
Microfabricated planar interdigitated electrodes can detect and analyze cells or particles giving an impedance-based characterization. This method presents several advantages: real-time detection, label-free analysis, non-invasive sensing, easiness of integration and high-throughput ... Mehr lesen
Several undergraduate programs include the “Heat transfer” subject and, in our experience, it is hard for the students to grasp the concepts that are presented in the course. With this in mind, we designed and constructed an apparatus for the experimentation of heat transfer in a short ... Mehr lesen
An experimental LED light composed of a multi-chip LED-module, a LED driver and an efficient heat sink, was investigated using COMSOL Multiphysics software and the Heat Transfer Module. In an LED light heat is mainly generated in the LEDs but some amount of heat is generated also in the ... Mehr lesen
Steam generators (SGs) are used in CANDU® nuclear reactors as heat exchangers to convert water into steam using heat generated in the reactor core. Ferrous trefoil broach support structures prevent excessive vibration of thousands of SG tubes. A probe that uses pulsed eddy current (PEC) ... Mehr lesen
One viable alternative to non-renewable fossil fuels is the fuel cell. A special class of FC i.e. Proton Exchange Membrane Fuel Cell (PEMFC) has been investigated during the present study. Membrane is a very important part of a PEMFC as most ohmic losses occurs here and limits the ... Mehr lesen
The Gas Electron Multiplier (GEM) technology has been proven to tolerate rate larger than 50 MHz/cm2 without noticeable aging and to provide the sub millimeter resolution on working chambers up to 45x45 cm2. A new GEM based tracker is under development for the Hall A upgrade at ... Mehr lesen
Atherosclerosis in arteries is caused by the formation of stenosis : fatty depositions, on the artery wall. In current medicine, the practice is to observe the maximum percentage occlusion at any arbitrary cross-section and diagnose the patient on that basis, which might not always ... Mehr lesen
