Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Alle

Boston 2024

Suchbegriff:

gas separation

Model for Steam Reforming of Ethanol Using a Catalytic Wall Reactor

J. Torres[1], and D. Montane[2]
[1]Centre Huile Lourde Ouvert et Experimental (CHLOE), University of Pau, France
[2]Department of Chemical Engineering, Virgili University, Tarragona, Spain

Steam Reforming of Ethanol using a Catalytic Wall Reactor (CWR) was successfully studied using COMSOL Multiphysics. A mathematical model was used to describe the reactor performance in terms of the main variables and dimensionless groups. Simulations showed that at specified conditions ... Mehr lesen

Computational Fluid Dynamic Modeling of Geothermal Membrane Distillation

C. Rivera [1], C. Sanchez [1], J. Paiz [1], M. Troyer [1], F. Huang [1]
[1] Department of Civil & Environmental Engineering, New Mexico Institute of Mining and Technology, Socorro NM, USA

A 3-D COMSOL model was established to investigate the heat and mass transfer in a hollow fiber membrane (HFM) module for direct contact membrane distillation (DCMD). Membrane distillation is a separation process that relies on vapor pressure gradients to drive the production of purified ... Mehr lesen

Modeling Solid-Liquid Settling System as a Two-Phase Flow Problem

L. Gyurik [1], A. Egedy [1], Zs. Ulbert [1],
[1] University of Pannonia, Veszprém, Hungary

Sedimentation is a challenging two-phase problem to model and simulate. Many applications in the industry use sedimentation for separation. For example treatment of wastewater often carried out in settling basins. Different types of the sedimentation process include independent and zone ... Mehr lesen

A Computational Fluid Dynamics Study of Fluid Catalytic Cracking Cyclones

J. W. McTernan[1], I. Abu-Mahfouz[2]
[1]Buell Division of Fisher-Klosterman Inc., Lebanon, PA, USA
[2]Pennsylvania State University - Harrisburg, Middletown, PA, USA

Fluidized Catalytic Cracking (FCC) regenerators utilize a fluidized bed to facilitate catalyst regeneration. Cyclones are used to separate the catalyst from the gas stream and return the catalyst to the fluidized bed; as the gas progresses through the system for further processing. This ... Mehr lesen

Advancements in Carbon Dioxide and Water Vapor Separations Using COMSOL Multiphysics® Software

J. Knox[1], R. F. Coker[1], C. F. Gomez[1], R. Schunk[1], R. Cummings[1]
[1]NASA Marshall Space Flight Center, Huntsville, AL, USA

NASA's Advanced Exploration Systems (AES) program is pioneering new approaches for rapidly developing prototype systems, demonstrating key capabilities, and validating operational concepts for future human missions beyond Earth orbit" [1]. Under the new Atmosphere Revitalization Recovery ... Mehr lesen

Magneto-hydrodynamic Flow in Electrolyte Solutions

M. Qin[1], and H. Bau[1]
[1]Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, Pennsylvania, USA

The paper presents and compares two models for simulating magneto-hydrodynamic flow of RedOx electrolyte in a conduit patterned with circular pillars. The first model solves the coupled Nernst-Planck and Navier-Stokes equations subjected to Butler-Volmer electrode kinetics and provides ... Mehr lesen

Simulation of Production Processes using the Multiphysics Approach: The Electrochemical Machining Process

R. van Tijum
Dr.
Advanced Technology Center, Philips Consumer Lifestyle, Drachten, The Netherlands

Redmer van Tijum studied Applied Physics at the University of Groningen. In 2006, he received his PhD title on ‘Interface and surface roughness of polymer metal laminates’ in the field of Material Science at the University of Groningen. After that he became research and development ... Mehr lesen

Study of Electrochemically Generated Two-Phase Flows

J. Schillings [1], O. Doche [2], J. Deseure [1],
[1] LEPMI, Grenoble, France
[2] SIMAP, Grenoble, France

The dependency of electrochemical processes performances on mass transfer is well-known. Electrolyte flow in the vicinity of electrodes surface can enhance reactions due to increased mass transfer. This flow can be generated by the production of a gaseous phase, leading to a natural ... Mehr lesen

Thermal Modeling of Chlorination Reactor

A. A. Bhat [1], D. Sujish [1], B. Muralidharan [1], G. Padmakumar [1], K. K. Rajan [1]
[1] Indira Gandhi Centre for Atomic Research, Kalpakkam, India

Chlorine reactor is used to dry molten LiCl-KCl eutectic salt before it is put to use in electrorefining operation. Molten salt electrorefining is a pyrochemical method of separation of heavy elements from spent metallic nuclear fuel. It is a high-temperature process which uses molten ... Mehr lesen

CFD Analysis of Argon Cell for Pyrochemical Processing

S. Agarwal[1], S. P. Ruhela[1], B. Muralidharan[1], B. P. Reddy[2], B. K. Sharma[1], K. Nagarajan[2], C. A. Babu[3], and K. K. Rajan[1]
[1]Fast Reactor Technology Group, Indira Gandhi Centre for Atomic Research
[2]Chemistry Group, Indira Gandhi Centre for Atomic Research
[3]HBNI & CDG, Indira Gandhi Centre for Atomic Research

An inactive Demonstration facility for the integrated pyroprocess, named High temperature Electrorefining (HTER) facility is in developing stage. This facility is equipped with several types of pyroprocess equipment such as electro-refiner, salt and cadmium distillation equipment, ... Mehr lesen

Erste

61–70 of 144

Letzte