Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

what module do I need to do thermal expansion simulation?

Please login with a confirmed email address before reporting spam

Hi all,

I need to analyze the RF performance of microwave devices when it's thermally expanded. We have 'Heat transfer module' and 'RF module'. I couldn't find a way to do the simulation. Is any other module I need to do the analysis? Thanks!

Kan

1 Reply Last Post 01.11.2010, 16:31 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 01.11.2010, 16:31 GMT-4
Hi

you might need the ST structural or the MEMS module, to get the thermal exansion "alpha", depends a little how far you want to go, the best is to contact your local "rep" they can tell for sure

--
Good luck
Ivar
Hi you might need the ST structural or the MEMS module, to get the thermal exansion "alpha", depends a little how far you want to go, the best is to contact your local "rep" they can tell for sure -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.