Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Current Time Step Variable

Posted 21.04.2011, 12:51 GMT-4 Version 4.1 6 Replies

Franz Bozsak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear COMSOL users,

does anyone know the name of the variable where COMSOL saves the current time step, so it could be used in an expression? (If that was possible at all)

I looked through the manual and could not find anything.

Thanks for your help,
Franz
6 Replies Last Post 21.04.2011, 18:30 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.04.2011, 13:04 GMT-4
Hi

during solver process it "t" for the time value, if you need to select a solution at a given time you have the "at()" operators, see the doc

--
Good luck
Ivar
Hi during solver process it "t" for the time value, if you need to select a solution at a given time you have the "at()" operators, see the doc -- Good luck Ivar
Franz Bozsak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.04.2011, 13:07 GMT-4
Hi Ivar,

thanks for your quick reply. Unfortunately, this is not what I meant: I need the actual current time step (so delta t) used in the solver.

Franz
Hi Ivar, thanks for your quick reply. Unfortunately, this is not what I meant: I need the actual current time step (so delta t) used in the solver. Franz
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.04.2011, 13:33 GMT-4
Hi

missed that ;)
There are a few threads about this, and something has been added in the last released, check the release notes, but I haven't used it, so I cannot remember like that. (be sure you patch to latest update)

--
Good luck
Ivar
Hi missed that ;) There are a few threads about this, and something has been added in the last released, check the release notes, but I haven't used it, so I cannot remember like that. (be sure you patch to latest update) -- Good luck Ivar
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.04.2011, 13:42 GMT-4
Hello Franz,
Perhaps we can go at this from a different angle. Why do you think you need to know what the time step is called? What are you planning to do with it?

I am asking this because I suspect that you may be trying to reimplement something that's already available in the software (like time derivatives for instance).
Hello Franz, Perhaps we can go at this from a different angle. Why do you think you need to know what the time step is called? What are you planning to do with it? I am asking this because I suspect that you may be trying to reimplement something that's already available in the software (like time derivatives for instance).
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.04.2011, 13:55 GMT-4
In case you REALLY need the time step, see User's Guide, version 4.1, page 85.
In case you REALLY need the time step, see User's Guide, version 4.1, page 85.
Franz Bozsak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.04.2011, 18:30 GMT-4
Thanks a lot for your responses! I will check that tomorrow morning.
Unfortunately, I would like to do something that is currently not yet available in COMSOL: Stabilization schemes in the PDE interface!
Thanks a lot for your responses! I will check that tomorrow morning. Unfortunately, I would like to do something that is currently not yet available in COMSOL: Stabilization schemes in the PDE interface!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content