Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Boundary integration for a range of time
Posted 23.05.2011, 16:41 GMT-4 Heat Transfer & Phase Change, Results & Visualization Version 3.5a 2 Replies
Please login with a confirmed email address before reporting spam
I have a doubt analyzing my postprocesing data. I´m simulating 4 walls like a room in 3D with radiative heat flux and ambient temperature whose change along the day in the heat transfer module in COMSOL 3.5a, so i´ve normal heat flux inside my walls in 24 hours in periods the one to one hour. I used the postprocessing menu the boundary integration but the integration is for a specific time... and my question is if i can do the integral of heat flux of one wall by the way, for example for a range of 1 to 4 hours... is it possible???
I really apprecite some advice,
Thank you,
Ivette. =)
Please login with a confirmed email address before reporting spam
check to KB (knowledge Base of COMSOl) I believe to remember its described therein, it has been addresses a few time son the Forum already
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Ivette.