Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

custom constraints in 3D solid mechanics

Please login with a confirmed email address before reporting spam

I want to simulate some eigenmode in 3D solid mechanics but I want to add some constraints in the physics. For example I want to make sure the displacement of the mode that I am simulating is only in z-direction (there is no displacement in x,y-directions). To put it more accurately it is in cylindrial coordinates and the displacement is only in polar direction. How can I do that in comsol? Can anybody give a hint?

1 Reply Last Post 02.09.2011, 15:15 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 02.09.2011, 15:15 GMT-4
Hi

one way is to use aprescribed displacement BC and just define x,y = 0 and leave Z free, or in 2D axi r=0 and leave again z free

Another way is to leave the modes appear and sort the one related to "z"

But adding BCs mean that you are altering the model w.r.t. a free free case

--
Good luck
Ivar
Hi one way is to use aprescribed displacement BC and just define x,y = 0 and leave Z free, or in 2D axi r=0 and leave again z free Another way is to leave the modes appear and sort the one related to "z" But adding BCs mean that you are altering the model w.r.t. a free free case -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.