Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Meshing techniques in comsol

Posted 16.01.2019, 06:41 GMT-5 Low-Frequency Electromagnetics Version 5.3a 1 Reply

Pooja Kenchetty
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to know if any there are any meshing techinques that can solve a complex domain consisting of extremely small and sensitive domain elements. (finer than extremely fine). I am using COMSOL Multiphysics with AC/DC module 5.3(a).

1 Reply Last Post 16.01.2019, 08:26 GMT-5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 16.01.2019, 08:26 GMT-5
Updated: 4 years ago 22.10.2020, 14:25 GMT-4

Short answer: yes, plenty. Long answer: see Chapter 8 in the Reference Manual for COMSOL Multiphysics, and watch the video on meshing in the Learning Center. There are also many blog posts on meshing, see this link as a starting point.

Best,

Jeff

-------------------
Jeff Hiller
Short answer: yes, plenty. Long answer: see Chapter 8 in the Reference Manual for COMSOL Multiphysics, and watch the video on meshing in the [Learning Center](https://www.comsol.com/learning-center). There are also many blog posts on meshing, see [this link](https://www.comsol.com/blogs/category/all/mesh/) as a starting point. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content