Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

AC Voltage source in magnetic field interface.

Please login with a confirmed email address before reporting spam

Hi,

I'd like to study the distribution of resistive losses on a slab with eddy current produced by an inductor. In my study the inductor works with an AC voltage of 300V with a frequency of 10kHz. I tried to build a model to do that and i use symmetry in order to avoid large number of degree of freedom. The model is a eighth of the real dimension. My question is: How i can give the voltage difference, so i mean how i can generate current? In the model i'm using the impedence boundary condition and the difference voltage is applied in the surface number 8 and 17.

Can someone help me.

Thanks

Nicola


2 Replies Last Post 02.04.2012, 02:45 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30.03.2012, 13:55 GMT-4
Hi

I would suggest to use the frequency domain solver, then to set one boundary to the GND and another to a terminal/lumped port with a given voltage (amplitude)

--
Good luck
Ivar
Hi I would suggest to use the frequency domain solver, then to set one boundary to the GND and another to a terminal/lumped port with a given voltage (amplitude) -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 02.04.2012, 02:45 GMT-4
Hi,

you can play with lumped port. I have modified your model with full geometry (symmetry is not so easy for magnetic fields).

Ralf
Hi, you can play with lumped port. I have modified your model with full geometry (symmetry is not so easy for magnetic fields). Ralf

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.