Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

FEM Theory question

Please login with a confirmed email address before reporting spam

I remember from my FEM course at university that systems equations to find displacement like:

[K][u]=[F]

cannot be solved if the body is free (no boundary conditions). Matrix K becomes singular and cannot be inverted. Solutions cannot be found. Is this right?

If rigid body displacements are permitted there isn't a single solution to equilibrium problem. Now what happens in COMSOL if I put a harmonic load on a body with no boundary conditions (no constraints) and perform a frequency response analysis? Will it converge to a solution? Will it give me an error? Or does COMSOL output a solution in some way (even if that has little or no sense)?

Marco

2 Replies Last Post 07.04.2012, 07:51 GMT-4
Nagi Elabbasi Facebook Reality Labs

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 06.04.2012, 00:31 GMT-4
If rigid body displacements are permitted there is no single solution as you said, but only in static analysis. In dynamic analyses (transient or harmonic) there is a unique solution. In that case the effective [K] matrix is not singular, due to the contribution from the inertia term.

Nagi Elabbasi
Veryst Engineering
If rigid body displacements are permitted there is no single solution as you said, but only in static analysis. In dynamic analyses (transient or harmonic) there is a unique solution. In that case the effective [K] matrix is not singular, due to the contribution from the inertia term. Nagi Elabbasi Veryst Engineering

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 07.04.2012, 07:51 GMT-4
Yes. The equation will be then like:

[M][a]+[K][u]=[F]

where a is d2u/dt2 (in absence of a better notation here...) and F is a vector of harmonic loads.

But this kind of boundaries/constrains give good results, or maybe the matrixes become bad conditioned?

Yes. The equation will be then like: [M][a]+[K][u]=[F] where a is d2u/dt2 (in absence of a better notation here...) and F is a vector of harmonic loads. But this kind of boundaries/constrains give good results, or maybe the matrixes become bad conditioned?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.