Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

piezoresistance

Please login with a confirmed email address before reporting spam

dear all,

how can i simulate the change of resistance caused by structural deformation of the piezoresistive structure under acceleration field?

thanks in advance

4 Replies Last Post 22.06.2012, 15:58 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 09.05.2012, 13:11 GMT-4
Hi

I would say you need the structural and some EC type acdc physics and material properties that changes the resistivity w.r.t. the internal stress for the material of your sensor

--
Good luck
Ivar
Hi I would say you need the structural and some EC type acdc physics and material properties that changes the resistivity w.r.t. the internal stress for the material of your sensor -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19.06.2012, 05:54 GMT-4
Firts of all thanks a lot for your reply but my problem is when select them both and click compute it solves both of them seperately and i am not able to get any results. Do you have any idea about it.

Thanks

umut
Firts of all thanks a lot for your reply but my problem is when select them both and click compute it solves both of them seperately and i am not able to get any results. Do you have any idea about it. Thanks umut

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.06.2012, 06:17 GMT-4
Hi

you need to get the two to exchange something, like a Force, this you must do manually by linking the equations.

--
Good luck
Ivar
Hi you need to get the two to exchange something, like a Force, this you must do manually by linking the equations. -- Good luck Ivar

Bjorn Sjodin COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.06.2012, 15:58 GMT-4
The new version of the MEMS Module has 3 new dedicated user interfaces for piezoresistivity. Please see:
www.comsol.com/products/4.3/#mems
for more information.
The new version of the MEMS Module has 3 new dedicated user interfaces for piezoresistivity. Please see: http://www.comsol.com/products/4.3/#mems for more information.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.