Using Heat Release Rate (HRR) vs. Temperature-Time Curve as Input

Please login with a confirmed email address before reporting spam

Hello,

I am modeling a fire scenario in COMSOL and have the fire defined by a Heat Release Rate (HRR, kW) versus time curve. Is it possible to use an HRR-time curve directly as an input in COMSOL? Can a tabulated HRR-time function be imported and used directly as a time-dependent heat source? My objective is to model the thermal response of a structure subjected to a fire characterized by a measured/design HRR-time history. Any guidance or example models would be greatly appreciated. Thank you.


3 Replies Last Post 16.11.2026, 16:38 GMT-8
Robert Koslover RF/Antennas

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago 26.10.2026, 18:25 GMT-7
Updated: 5 hours ago 16.11.2026, 12:02 GMT-8

Edited: Yes, you should be able to import a text or csv formatted set of tabulated measured values vs. time, to use in your time-domain model as part of a source specification. You should probably import the data into an interpolated function. Include some smoothing, so your time-domain model won't struggle with an unphysical ragged definition.

-------------------
Robert A. Koslover
Edited: Yes, you should be able to import a text or csv formatted set of tabulated measured values vs. time, to use in your time-domain model as part of a source specification. You should probably import the data into an interpolated function. Include some smoothing, so your time-domain model won't struggle with an unphysical ragged definition.

Please login with a confirmed email address before reporting spam

Posted: 9 hours ago 16.11.2026, 07:59 GMT-8

Thank you for the earlier response. I imported my HRR-time curve as an interpolation function HRR_V1(t) and applied it using Heat Flux → Heat Rate, with P0=HRR_V1(t). My understanding is that COMSOL converts this to an equivalent heat flux q(t)=HRR(t)/Aq(t) using the selected boundary area. Is this interpretation correct?

Thank you for the earlier response. I imported my HRR-time curve as an interpolation function HRR_V1(t) and applied it using Heat Flux → Heat Rate, with P0=HRR_V1(t). My understanding is that COMSOL converts this to an equivalent heat flux q(t)=HRR(t)/Aq(t) using the selected boundary area. Is this interpretation correct?


Robert Koslover RF/Antennas

Please login with a confirmed email address before reporting spam

Posted: 12 minutes ago 16.11.2026, 16:38 GMT-8

I don't know the details of how it will be interpreted, but you can separately plot the imported function, within Comsol Multiphysics, to see if it looks like the curve you intended. And you can even plot it in the results (post-processing) section too, after your run. Thus, you should be able to determined if the input specification you are attempting is being represented correctly or not.

-------------------
Robert A. Koslover
I don't know the details of how it will be interpreted, but you can separately plot the imported function, within Comsol Multiphysics, to see if it looks like the curve you intended. And you can even plot it in the results (post-processing) section too, after your run. Thus, you should be able to determined if the input specification you are attempting is being represented correctly or not.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.