Die Application Gallery bietet COMSOL Multiphysics® Tutorial- und Demo-App-Dateien, die für die Bereiche Elektromagnetik, Strukturmechanik, Akustik, Strömung, Wärmetransport und Chemie relevant sind. Sie können diese Beispiele als Ausgangspunkt für Ihre eigene Simulationsarbeit verwenden, indem Sie das Tutorial-Modell oder die Demo-App-Datei und die dazugehörigen Anleitungen herunterladen.
Suchen Sie über die Schnellsuche nach Tutorials und Apps, die für Ihr Fachgebiet relevant sind. Beachten Sie, dass viele der hier vorgestellten Beispiele auch über die Application Libraries zugänglich sind, die in die COMSOL Multiphysics® Software integriert und über das Menü File verfügbar sind.
This model shows how you can use the Non-Isothermal Pipe Flow interface together with the Heat Transfer in Solids interface to model the cooling of a injection molded polyurethane part for a car steering wheel. The equations describing the cooling channels are fully coupled to the heat ... Mehr lesen
The dispersion curves for a fluid-filled pipe with elastic walls are computed and compared with the analytical results for a pure elastic and an acoustic waveguide, respectively. Results show good agreement and also provide insight into the dynamics of the fluid-filled pipe at low and ... Mehr lesen
A cooling flange in a chemical process is used to cool the process fluid, which flows through the flange. The surrounding air cools the flange via natural convection. In the stationary model, the forced convection to the process fluid is modeled using a constant heat transfer ... Mehr lesen
This model studies a part of a shell-and-tube heat exchanger where hot water enters from above. The cooling medium flows through the tubes that, in this model, impose a constant temperature at the walls. Furthermore, the tubes are assumed to be made of stainless steel and the heat flux ... Mehr lesen
In this example, an SF6/argon plasma reactor at moderate pressure is studied using a global model. The heavy species heat equation is included. Parametric sweeps for input power and argon mole fraction are computed. Mehr lesen
In this tutorial example, the concepts of Component Mode Synthesis (CMS) are introduced through a simple solid model of a cantilever beam. Parts of the beam are reduced by the CMS technique. It is, furthermore, shown how CMS can be used to represent both the static and dynamic behavior ... Mehr lesen
Ultraschall-Winkelprüfsysteme werden für die zerstörungsfreie Prüfung von festen Objekten, wie Metallrohren, verwendet. Sie sind besonders nützlich für die Erkennung von Fehlern in und um Schweißbereiche, wie Poren, kleine Risse oder fehlende Verschmelzung. Die zerstörungsfreie Prüfung ... Mehr lesen
In diesem Modell wird die Akustik des Kleinen Saals im Konzerthaus Berlin mit Ray Tracing simuliert. Es wird eine vollständige Untersuchung des Raums in 1/3-Oktaven-Bändern mit 10 Paaren von Quelle-Empfänger-Positionen durchgeführt. Die raumakustischen Parameter werden aus den ... Mehr lesen
This is a model of the secondary current distribution in a zinc electrowinning cell. The model investigates the impact on the current distribution when changing the electrode alignment in a parametric study. The geometry is in 2D. Mehr lesen
Die Hauptverteidigung eines U-Boots besteht in seiner Fähigkeit, während der Fahrt verborgen zu bleiben. Da Radiowellen vom Meerwasser stark absorbiert werden, ist Sonar eine der wichtigsten Methoden zum Aufspüren von U-Booten. Sonarsysteme werden auch bei der Unterwasserforschung und in ... Mehr lesen