Die Application Gallery bietet COMSOL Multiphysics® Tutorial- und Demo-App-Dateien, die für die Bereiche Elektromagnetik, Strukturmechanik, Akustik, Strömung, Wärmetransport und Chemie relevant sind. Sie können diese Beispiele als Ausgangspunkt für Ihre eigene Simulationsarbeit verwenden, indem Sie das Tutorial-Modell oder die Demo-App-Datei und die dazugehörigen Anleitungen herunterladen.
Suchen Sie über die Schnellsuche nach Tutorials und Apps, die für Ihr Fachgebiet relevant sind. Beachten Sie, dass viele der hier vorgestellten Beispiele auch über die Application Libraries zugänglich sind, die in die COMSOL Multiphysics® Software integriert und über das Menü File verfügbar sind.
This example demonstrates how to use temperature dependent materials within the Nonlinear Structural Materials Module. A large container holds pressurized hot water. Several pipes are attached to the pressure vessel. Those pipes can rapidly transfer cold water in case of an emergency ... Mehr lesen
In this study, the compressible turbulent flow through a supersonic ejector is modeled using the High Mach Number Flow interface in the CFD Module. Ejectors are simple mechanical components used for a wide range of applications, including industrial refrigeration, vacuum generation, gas ... Mehr lesen
This tutorial demonstrates how to partition a 3D part to create a swept mesh. The example explores different strategies for partitioning the geometry, and demonstrates how to combine hexahedral and tetrahedral meshes. Mehr lesen
An isothermal single particle model formulation for a lithium-ion battery is presented in this work. The single particle model is a simplification of the 1D formulation for a lithium-ion battery along with a few assumptions. The model is typically valid for low-medium current scenarios. ... Mehr lesen
This tutorial uses a “black-box” approach to define a battery model based on a small set of lumped parameters, assuming no knowledge of the internal structure or design of the battery electrodes, or choice of materials. The input to the model is the battery capacity, the initial state ... Mehr lesen
In this example, the structural integrity of a cylinder made by a fiber composite is assessed both at the macroscale and at the microscale level. Along with macroscale analyses, structural composites need microscale stress and failure analyses to identify the critical constituents in ... Mehr lesen
Linearmotoren werden in vielen Anwendungen eingesetzt, die eine translatorische Bewegung benötigen. Typische Merkmale von Linearmotoren sind hohe Präzision oder schnelle Beschleunigung. Dieses Modell untersucht einen Synchronmotor mit Dreiphasenwicklung auf dem stationären Teil und ... Mehr lesen
In diesem Modell wird eine vollständige transiente Analyse eines Lautsprechertreibers durchgeführt, die die Modellierung von nichtlinearen Effekten ermöglicht. Es erweitert die lineare Analyse im Frequenzbereich, die im Tutorial-Modell des Lautsprechertreibers durchgeführt wurde. Die ... Mehr lesen
Ein Getriebe dient der Kraftübertragung von einem Motor auf die zugehörigen Räder oder Zahnräder, was zu einer Geräuschabstrahlung in die Umgebung führen kann. Dies ist auf die Übertragung unerwünschter lateraler und axialer Kräfte auf die Lager und das Gehäuse zurückzuführen, während ... Mehr lesen
Electronic equipment often has to be certified to function after having been subjected to a specified shock load. In this example, the effect of an 50g 11ms half sine shock on a circuit board is investigated using response spectrum analysis. The results are compared with a time domain ... Mehr lesen